433 Related Papers & Publications Found

Ordered by Key Words
Reset

ANN
1 Papers / Publications
Jaime B., Abdulaal A., Asfour S., " ELECTRIC LOAD PATTERN CLASSIFICATION USING PARAMETER ESTIMATION, CLUSTERING AND ARTIFICIAL NEURAL NETWORKS, nternational Journal of Power and Energy Systems, | MI-IAC

Air Compressors
6 Papers / Publications
Nimbalkar, S.U., Muller, M.R., " Utilizing Waste Pressure In Industrial Systems, ASME/ATI, Energy: production, distribution and conservation, Vol. 1, 229-237, | RU-IAC
Nimbalkar, S.U., Muller, M.R., " An experimental investigation of the optimum geometry for the cold end orifice of a vortex tube, Applied Thermal Engineering, Vol. 29, 509-514, | RU-IAC
Nimbalkar, S., Muller, M.R., Pasi, S., " Utilizing ‘Waste Pressure” in Industrial Systems, ASEEE Summer Study on Energy Efficiency in Industry, West Point, New York, July, | RU-IAC
Zahlan, J., Avci, M., Asfour, S., " A New Approach for Determining Optimal Air Compressor Location in A Manufacturing Facility to Increase Energy Efficiency, Thirty-Sixth Industrial Energy Technology Conference, New Orleans, Louisiana, May, | MI-IAC
Zahlan, J., " Optimization of Air Compressor Location and Capacity to Improve Energy Efficiency and Performance in Manufacturing Facilities, Doctoral Dissertation, Miama, Florida, | MI-IAC

Air Conditioning
11 Papers / Publications
Terrill, T.J., Brown, M.L., Cheyne Jr., R.W., Cousins, A.J., Daniels, B.P., Erb, K.L., Garcia, P.A., 2Leutermann, M.J., Nel, A.J., Robert, C.L., Widger, S.B., Williams A.G., Rasmussen, B.P, " Identifying Efficiency Degrading Faults in Split Air Conditioning Systems, Industrial Energy Technology Conference Proceedings, | AM-IAC
Sheshadri, S., and Rasmussen, B.P, " Secondary Control Strategies for Cycling of Air Conditioning and Refrigeration Systems, ASHRAE Transactions, SA-12-016, vol. 118, no. 2, | AM-IAC
Rasmussen, B.P. and Alleyne, A., " Gain Scheduled Control of an Air Conditioning System Using the Youla Parameterization, IEEE Transactions on Control Systems Technology, vol. 18, no. 5, pp. 1216-1225, Sept., | AM-IAC
Shah, R., Rasmussen, B.P., and Alleyne, A., " Application of a Multivariable Adaptive Control Strategy to Automotive Air Conditioning Systems, International Journal of Adaptive Control and Signal Processing, vol. 18, no. 2, pp. 199-221, | AM-IAC
Rasmussen, B.P., Musser, A., Alleyne, A., Bullard, C., Hrnjak, P., and Miller, N., " A Control-Oriented Model of Transcritical Air-Conditioning System Dynamics, 2002 SAE Transactions Journal of Passenger Cars: Mechanical Systems, pp. 374-381, | AM-IAC
Liang, S., Rasmussen, B.P., and Kaplan, M., " Multi-Parametric Tuning of Dynamic Air Conditioning Models Using Experimental Data, 2012 Dynamic Systems and Control Conference, Ft. Lauderdale, FL, | AM-IAC
Rasmussen, B.P. and Alleyne, A., " Gain Scheduled Control of an Air Conditioning System Using the Youla Parameterization, 2006 American Control Conference, Minneapolis, MN, | AM-IAC
Rasmussen, B.P., Alleyne, A., and Musser, A., " Iterative Modeling and Identification of a CO2 Air Conditioning System, 2004 ASME International Mechanical Engineering Congress, | AM-IAC
Shah, R., Alleyne, A.G., and Rasmussen, B.P., " Application of Multivariable Adaptive Control to Automotive Air Conditioning Systems, 2003 ASME International Mechanical Engineering Congress, | AM-IAC
Brown, C.D; Leach, J.W.; Terry, S.D, " Evaporative Air Conditioning in a Manufacturing Facility, Energy Engineering; 199, 96 (4); 40-58, | NC-IAC
Pohlman, D., Qayyum, A., Parker, S. and Kissock, K., " Staging Packaged Air Conditioning Units To Improve Energy Efficiency And Humidity Control By Reducing Cycling Losses, ASHRAE Transactions, SE-14-004, | UD-IAC

Automotive
15 Papers / Publications
Mehta, D. Paul and Ryan Esch, " Applications of Waste Heat Recovery in Automotive Manufacturing Related Industries., 15th International Research/Expert Conference., Prague, Czech Republic, 12-18 September, 2011, | BD-IAC
Mehta, D. Paul and Ryan Esch, " Energy Efficiency Through Waste Heat Recovery in Automotive Manufacturing Related Industries, The Society of Automotive Engineers (SAE) 2011 World Congress, COBO Center, Detroit, MI, April 12-14, 2011, | BD-IAC
Mehta, D. Paul and Ryan Esch, " An Analysis of Waste Heat Recovery in Automotive Manufacturing Related Industries., Proceedings of the American Council on Energy Efficient Economy (ACEEE), Niagara Falls, NY, July 27-29, 2011, | BD-IAC
Zhai. Q., Cao, H.J., Zhao, X., Yuan, C., " Assessing Application Potential of Clean Energy Supply for Greenhouse Gas Emission Mitigation: A Case Study on General Motors Global Manufacturing, Journal of Cleaner Production, Volume 75, 2014, Pages 11–19., | WM-IAC
Yuan, C. and Dornfeld, D., " Reducing the Environmental Footprint and Economic Costs of Automotive Manufacturing through an Alternative Energy Supply, Transaction of North America Manufacturing Research Institute, Vol. 37, 2009, pp.427-434., | WM-IAC
Eldredge, B., Rasmussen, B., and Alleyne, A., " Automotive Vapor Compression Cycles: Validation of Control-Oriented Models, SAE 2006 Transactions, Journal of Engines, 2006-01-1452, | AM-IAC
Shah, R., Rasmussen, B.P., and Alleyne, A., " Application of a Multivariable Adaptive Control Strategy to Automotive Air Conditioning Systems, International Journal of Adaptive Control and Signal Processing, vol. 18, no. 2, pp. 199-221, | AM-IAC
Eldredge, B.D., Rasmussen, B.P., and Alleyne, A., " Automotive Vapor Compression Cycles: Validation of Control-Oriented Models, Society of Automotive Engineers 2006 World Congress, Detroit, Michigan, | AM-IAC
Keir, M.C., Rasmussen, B.P., and Alleyne, A., " Improving Energy Efficiency in Automotive Vapor Compression Cycles through Advanced Control Design, Society of Automotive Engineers 2006 World Congress, Detroit, Michigan, | AM-IAC
Shah, R., Alleyne, A.G., and Rasmussen, B.P., " Application of Multivariable Adaptive Control to Automotive Air Conditioning Systems, 2003 ASME International Mechanical Engineering Congress, | AM-IAC
Rasmussen, B., Alleyne, A., Bullard, C., Hrnjak, P., and Miller, N., " Control-Oriented Modeling and Analysis of Automotive Transcritical AC System Dynamics, 2002 American Control Conference, Anchorage, AK, | AM-IAC
Gopalakrishnan, B., Gupta, D.P., Bitar, A., " Analysis of Compressed Air and Process Heating Systems – A Case Study from Automotive Parts Manufacturer in Mexico, Proceedings of the Society of Automotive Engineers World Congress, Detroit, MI, | WV-IAC
Gopalakrishnan, B., Gupta, D.P., " Compressed Air Energy Saving Assessments (ESA) for the Automotive Supply Chain, SAE Technical Paper Series, SAE International, | WV-IAC
Talom L. T., Beyene A., " Heat Recovery from Automotive Engine, Applied Thermal Engineering, Vol. 29, 2-3, | SD-IAC

Benchmarking
1 Papers / Publications
Patil Y., Seryak, J., and Kissock, K., " Benchmarking Approaches: An Alternate Method to Determine Best Practice by Examining Plant-Wide Energy Signatures, ACEEE Summer Study on Energy in Industry, West Point, NY, July 19-22, | UD-IAC

Boilers
5 Papers / Publications
Justin Gibides; Ryan Nester; Stephen Terry; Herbert Eckerlin, " An evaluation of the losses and costs associated with coal versus natural gas firing at a north Carolina textile finishing plant, Energy Engineering: Journal of the Association of Energy Engineering, | NC-IAC
Gopalakrishnan, B., Gump, C.D., Gupta, D.P., Chaudhari, S.A., " Development of a Software System to Facilitate Implementation of Coal and Wood Co-Fired Boilers, Proceedings of the Industrial Energy Technology Conference, New Orleans, LA, May, | WV-IAC
Gopalakrishnan, B., Koonammodi, V., Sundaramoorthy, S., Chaudhari, S., " Multivariable Efficiency Evaluation of Boilers, Proceedings of the International Conference on Thermal Energy and Environment, India, | WV-IAC
Carpenter, K. and Kissock, K., " Common Excess Air Trends in Industrial Boilers with Single-Point Positioning Control and Strategies to Optimize Efficiency, ACEEE Summer Study on Energy in Industry, White Plains, NY, July 24-27, | UD-IAC
Carpenter, K. and Kissock, K., " Quantifying Energy Savings From Improved Boiler Operation, Industrial Energy Technology Conference, New Orleans, LA, May 11-12, | UD-IAC

Buildings
5 Papers / Publications
Mehta, D. Paul and Martin Wiesehan, " Sustainable Energy in Building Systems, The 3rd International Conference on Sustainable Energy Information Technology (SEIT 2013), Halifax, Canada, June 25-18, 2013, | BD-IAC
Sever, F., Kissock, K., Brown, D., and Mulqueen, S., " Estimating Industrial Building Energy Savings using Inverse Simulation, ASHRAE2011-86073, Las Vegas, NM, Jan 29-Feb 2, | UD-IAC
Kissock, K., Selvacanabady, A., Raghavan, N., " Simplified Model For Ground Heat Transfer From Slab-On-Grade Buildings, ASHRAE Transactions, DE-13-041, | UD-IAC
Hallinan, K. P., Brodrick, P., Northridge, J., Kissock, J. K., Brecha, R. J., " Establishing Building Recommissioning Priorities and Potential Energy Savings from Utility Energy Data, ASHRAE Transactions, ML-11-003, | UD-IAC
Moynihan, G.P. and Triantifilu, D., " Energy Savings for a Manufacturing Facility Using Building Simulation Modeling, Engineering Management Journal, 24:73-84, 2012, | UA-IAC

CHP
1 Papers / Publications
Dunkel, C., Oliver, R., Xing, T., Hess, H., Beyerlein, S., Shershta, D. and Smith, S., " Collaboration Between Senior Design Students and Campus Facilities Staff in Creating a Viable Cogeneration Design for the Campus Wood-Fired Boiler, 2015 ASEE Annual Conference and Exposition, Seattle, WA, | BS-IAC

CHP/Cogeneration
1 Papers / Publications
Nimbalkar, S., Muller, M.R., " CHP Program Design: Cost Benefits of Dispatching versus Baseline Operations, ASEEE Summer Study on Energy Efficiency in Industry, Westchester, New York, July, | RU-IAC

Campus
1 Papers / Publications
Dunkel, C., Oliver, R., Xing, T., Hess, H., Beyerlein, S., Shershta, D. and Smith, S., " Collaboration Between Senior Design Students and Campus Facilities Staff in Creating a Viable Cogeneration Design for the Campus Wood-Fired Boiler, 2015 ASEE Annual Conference and Exposition, Seattle, WA, | BS-IAC

Chemical Manufacturing
1 Papers / Publications
Rao, P., Muller, M.R., " Industrial Oxygen: Its Generation and Use, ASEEE Summer Study on Energy Efficiency in Industry, Westchester, New York, July, | RU-IAC

Chilled Water
2 Papers / Publications
G. Gaudani, A. Quintal and D. Kosanovic, "  Development of the Chilled Water System Analysis Tool for Assessing Energy Conservation Opportunities, ASME 2013 7th International Conference on Energy Sustainability, Minneapolis, MN, July 14-19, 2013, | MA-IAC
A. Quintal, G. Gaudani and D. Kosanovic, "  Chilled Water System Analysis Tool (CWSAT) and Application to Manufacturing Plants, 2013 SAE World Congress and Exhibition, Detroit, MI, April 16-18, 2013, | MA-IAC

Climate Change
3 Papers / Publications
Beyene A., Zevenhoven R., " Thermodynamics of Climate Change, Int. J. of Global Warming, Vol. 5, No. 1, | SD-IAC
Beyene A., MacPhee D., Zevenhoven R., " Anthropogenic Heat and Exergy Balance of the Atmosphere, Proceedings of ECOS, 24rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Italy, | SD-IAC
Trombley, D. and Kissock, K., " Economics of Energy Efficiency in a Carbon Constrained World, ACEEE Summer Study on Energy in Industry, White Plains, NY, July 24-27, | UD-IAC

Cogeneration
1 Papers / Publications
Dunkel, C., Oliver, R., Xing, T., Hess, H., Beyerlein, S., Shershta, D. and Smith, S., " Collaboration Between Senior Design Students and Campus Facilities Staff in Creating a Viable Cogeneration Design for the Campus Wood-Fired Boiler, 2015 ASEE Annual Conference and Exposition, Seattle, WA, | BS-IAC

Combined Heat and Power (CHP)
6 Papers / Publications
H. Gopalakrishnan and D. Kosanovic, " Economic optimization of combined cycle district heating systems, Sustainable Energy Technologies and Assessments, Vol. 7, 2014 91-100, | MA-IAC
S. Suresh and D. Kosanovic, " Energy and Exergy Analysis of a 16-MW Combined Cycle District Heating System with Performance Improvements, International Journal of Exergy, Vol. 13, No. 3, 2013, | MA-IAC
S. Suresh, H. Gopalakrishnan and D. Kosanovic, " Thermodynamic Analysis of Combined Cycle District Heating System, 33rd National Industrial Energy Technology Conference, New Orleans, LA, 40664, | MA-IAC
Ziviani D., Beyene A., Venturini M, " Design, analysis and optimization of a Micro-CHP ORC system for ultra-low grade heat recovery, J. Energy Resour. Technol. 136(1), 011602, | SD-IAC
Beyene A, Hochman J., " the CHP Experience in California: Inputs from the Field, International Energy and Sustainability Conference 2012, Shaping the Future Through Smart Grid Technologies, Farmingdale, NY, | SD-IAC
Phelps, S. and Kissock, J.K., " A Feasibility Study of Fuel Cell Cogeneration in Industry, Industrial Energy Technology Conference, Houston, TX, | UD-IAC

Combustion
13 Papers / Publications
Najafi, H., Woodbury, K. A., Keltner, N. R., and Beck, J. V., " Real-time measurement of Heat Flux by Directional Flame Thermometers using Filter Form IHCP Method, 2013 International Mechanical Engineering Congress and Exposition, Nov 10-14, 2013., | UA-IAC
N.J. Moore; S.D. Terry; K.M. Lyons, " Flame hysteresis effects in methane jet flames in air-coflow, Journal of Energy Resources Technology, Transactions of the ASME, | NC-IAC
Arvind Atreya, Howard R. Baum, " A Study of Radiative Flameless Combustion in a Furnace, Combustion and Flame, | UM-IAC
A. Atreya, " Effect of Shape and Size on the Heat and Mass Transfer Processes During Pyrolysis of Small Wood Particles, | UM-IAC
A. Atreya, " A Model for Combustion of Firebrands of Various Shapes, | UM-IAC
Xinyu Ming, Dan S. Borgnakke, Marco A. Campos, Pawel Olszewski,Arvind Atreya, Claus Borgnakke, " Possibility of Combustion Furnace Operation with Oxygen-Enriched Gas from Nitrogen Generator, | UM-IAC
H. Baum and A. Atreya, " Modeling Flameless Combustion in an Intensely Radiating Environment - Radiative Flameless Combustion in a Planar Momentum Jet, | UM-IAC
I. Lee and A. Atreya, " A study of the entrainment and mixing in confined turbulent jets used for industrial combustion, | UM-IAC
Insu Lee and A. Atreya, " A study of the entrainment and mixing in confined turbulent jets used for industrial combustion, Central States Combustion Institute Meeting, | UM-IAC
P. D. Teini, D. A. Karwat, and A. Atreya, " Molecular realignment during soot particle maturation, Combustion and Flame, | UM-IAC
Gopalakrishnan, B., Gump, C.D., Gupta, D.P., Chaudhari, S.A., " Development of a Software System to Facilitate Implementation of Coal and Wood Co-Fired Boilers, Proceedings of the Industrial Energy Technology Conference, New Orleans, LA, May, | WV-IAC

Composites
1 Papers / Publications
Lipke, D.W., Zhang, Y., Liu, Y., Church, B.C., and Sandhage, K.H., " Near net-shape/net-dimension ZrC/W-based composites with complex geometries via rapid prototyping and Displacive Compensation of Porosity, Journal of the European Ceramic Society, Vol. 30, 2010, pp: 2265-2277, | WM-IAC

Compressed Air
13 Papers / Publications
Mehta, D Paul and Vishnu R. Bongunuri, " Cost of Compressed Air as a Utility for Manufacturers, 35th World Energy Engineering Congress, Atlanta, GA, 2012, | BD-IAC
Yuan, C., Zhang, T., Rangarajan, A., Dornfeld, D., Ziemba, B., and Whitbeck, R., " A Decision-based Analysis of Compressed Air Usage Patterns in Automotive Manufacturing, Journal of Manufacturing Systems, Vol.25, 2006, pp.293-300., | WM-IAC
, " Using Outside Air for Flooded Oil Screw Compressors at an Industrial Facility, Proceedings of the Industrial Energy Technology Conference, | NC-IAC
Gopalakrishnan, B., Gupta, D.P., Chaudhari, S, " The Effect of System Storage on the Performance Profile of Rotary Screw Air Compressors, Energy Engineering Journal, Vol. 111, No. 4, pp. 25-33, | WV-IAC
Gopalakrishnan, B., Gupta, D.P., Bitar, A., " Analysis of Compressed Air and Process Heating Systems – A Case Study from Automotive Parts Manufacturer in Mexico, Proceedings of the Society of Automotive Engineers World Congress, Detroit, MI, | WV-IAC
Gopalakrishnan, B., Gupta, D.P., " Compressed Air Energy Saving Assessments (ESA) for the Automotive Supply Chain, SAE Technical Paper Series, SAE International, | WV-IAC
Gopalakrishnan, B., Gupta, D.P., Mardikar, Y., Chaudhari, S., Jadeja, J., " Diagnostics for Developing Energy Efficiency Measures in Compressed Air Systems, SAE World Congress & Exhibition, SP-2109, Detroit, | WV-IAC
Murphy, S. and Kissock, K., " Simulating Energy Efficient Control of Multiple-Compressor Compressed Air Systems, Industrial Energy Technology Conference, New Orleans, LA, | UD-IAC
Alkadi, N. and Kissock, K., " Improving Compressed Air Energy Efficiency in Automotive Plants, SAE 2011 World Congress, Detroit, MI, April 12-14, | UD-IAC
Abels, B. and Kissock, K., " Optimizing Compressed Air Storage for Energy Efficiency, SAE 2011 World Congress, Detroit, MI, April 12-14, | UD-IAC
Schmidt, C., Kissock, K., and Eger, C., " Improving Performance of Compressed Air Systems Through Calibrated Simulation, ACEEE Summer Study on Energy in Industry, West Point, NY, July 19-22, | UD-IAC
Schmidt and Kissock, " Estimating Energy Savings in Compressed Air Systems, Industrial Energy Technology Conference, Houston, TX, | UD-IAC
Schmidt and Kissock, " Power Characteristics of Industrial Air Compressors, Industrial Energy Technology Conference, Houston, TX, | UD-IAC

Controls
8 Papers / Publications
Parikh, P., and Rasmussen, B.P, " Impact of Controls-Energy Saving Strategies in Industries, Proceedings of the 2014 Industrial Energy Technology Conference, New Orleans, LA, | AM-IAC
Jalal, R., and Rasmussen, B.P, " Distributed Model Predictive Control for Networks with Limited Control Communication, Proceedings of the 2014 American Control Conference, Portland, OR, | AM-IAC
Elliott, M.S., and Rasmussen, B.P., " Neighbor-Communication Model Predictive Control and HVAC Systems, 2012 American Control Conference, Montreal, Canada, | AM-IAC
Elliott, M.S., Estrada, C., and Rasmussen, B.P., " Cascaded Superheat Control with a Multiple Evaporator Refrigeration System, 2011 American Control Conference, San Francisco, CA, | AM-IAC
Elliott, M.S., Shenoy, B., and Rasmussen, B.P, " A Control Architecture Solution to Superheat Nonlinearity, 2010 American Control Conference, Baltimore, MD, | AM-IAC
Alleyne, A., Rasmussen, B.P., Keir, M., and Eldredge, B.E., " Advances in Energy Systems Modeling and Control, 2007 American Control Conference, New York, NY, | AM-IAC
Rasmussen, B.P. and Alleyne, A., " Stable gain-scheduling on endogenous signals, 2005 American Control Conference, | AM-IAC
Gopalakrishnan, B., McCoy, M., " Adaptive Process Control for Turning Operation using Expert System, International Journal of Industrial and Systems Engineering, Vol. 3, No. 6, | WV-IAC

Cooling
4 Papers / Publications
Wornyoh, E.Y.A., Patel, D. and Schuessler, L., " An In Situ Mechanism for the Optimal Cooling of Oil-Lubricated Rolling Element Bearings and Planetary Gear Systems., ASME 2011 International Mechanical Engineering Congress and Exposition, Paper No. IMECE2011-64614, 2011, pp.71-80., | WM-IAC
Wornyoh, E.Y.A., Patel, D., Schuessler, L., Francis, A. and Garnett, C., " Improving Rolling Element Bearing Thermal Compliance Through In Situ Cooling., ASME/STLE 2011 International Joint Tribology Conference, American Society of Mechanical Engineers, Paper No. IJTC2011-61210, 2011, pp.245-247., | WM-IAC
Wornyoh, E.Y.A., Patel, D., Schuessler, L., Francis, A. and Garnett, C., " Improving Rolling Element Bearing Thermal Compliance Through In Situ Cooling, ASME/STLE 2011 International Joint Tribology Conference, American Society of Mechanical Engineers, Paper No. IJTC2011-61210, 2011, pp.245-247, | WM-IAC
Muller, M.R., Rao, P., Muller, M.B., " Understanding and Reducing Energy and Costs in Industrial Cooling Systems, Industrial Energy Technology Conference, New Orleans, Louisiana, May, | RU-IAC

Cooling Towers
3 Papers / Publications
Kasten, D.J., Muller, M.R., " Assessing the Performance of Cooling Towers and their Effect on Chiller Efficiency, ASEEE Summer Study on Energy Efficiency in Industry, Westchester, New York, July, | RU-IAC
Kasten, D.J., Muller, M.R., " Assessing the Performance of Cooling Towers and their Effect on Chiller Efficiency, ASEEE Summer Study on Energy Efficiency in Industry, Westchester, New York, July, | RU-IAC
Muller, M.B., Muller, M.R., " Introducing an Online Cooling Tower Performance Analysis Tool, Industrial Energy Technology Conference, New Orleans, Louisiana, May, | RU-IAC

Cost Analysis
2 Papers / Publications
Bozorgirad, M.A., H. Zhang, K.R. Haapala, and G.S. Murthy, " Environmental Impact and Cost Assessment of Incineration and Ethanol Production as Municipal Solid Waste Management Strategies, The International Journal of Life Cycle Assessment, Vol. 18, No. 8, pp. 1502-1512, | OR-IAC
Gopalakrishnan, B., Gajera, D., Athinarayanan, R., Chaudhari, S., " Process Costing of the Microchip, International Journal of Industrial and Systems Engineering, Vol. 8, No. 3, | WV-IAC

DOE Tools
2 Papers / Publications
G. Gaudani, A. Quintal and D. Kosanovic, "  Development of the Chilled Water System Analysis Tool for Assessing Energy Conservation Opportunities, ASME 2013 7th International Conference on Energy Sustainability, Minneapolis, MN, July 14-19, 2013, | MA-IAC
A. Quintal, G. Gaudani and D. Kosanovic, "  Chilled Water System Analysis Tool (CWSAT) and Application to Manufacturing Plants, 2013 SAE World Congress and Exhibition, Detroit, MI, April 16-18, 2013, | MA-IAC

Data Centers
2 Papers / Publications
Lajevardi, B., K. R. Haapala, and J. Junker, " Real-time Monitoring and Evaluation of Energy Efficiency and Thermal Management of Data Centers, SME Journal of Manufacturing Systems, | OR-IAC
Lajevardi, B., K. R. Haapala, and J.F. Junker, " Real-time Monitoring and Evaluation of Energy Efficiency and Thermal Management of Data Centers, NAMRI/SME, Vol. 42, Montreal, Quebec, Canada, | OR-IAC

Data Logging
5 Papers / Publications
Duarte, C.; Delmar, P. ; Goossen, K.W. ; Barner, K. ; Gomez-Luna, E., " Non-intrusive load monitoring based on switching voltage transients and wavelet transforms,, Future of Instrumentation International Workshop (FIIW), | DL-IAC
E. Gomez-Luna, G. Aponte, J. Pleite, C. Duarte, K. Goossen, " Non-Intrusive Monitoring of Power Transformers based on Transient Signals Analysis using Wavelet Transform, 2013 International Conference on Power Systems Transients, | DL-IAC
H. Gopalakrishnan and D. Kosanovic, " Real-Time Thermodynamic Performance Monitoring and Optimum Thermo-economic Operation of Power Plants, ASME Power 2011 Conference, Power Technical Publication: POWER2011-55018, Denver, CO, July 12-14, 2011, | MA-IAC
Ogot, M.M., Muller, M.R., Kasten, D.J., " Optimizing Student Use and Experiences in Industrial Assessments, Industrial Energy Technology Conference, Houston, Texas, April, | RU-IAC
Muller, M.B., Muller, M.R., " Portable Hands-on Instrument Training for Energy Engineers, Industrial Energy Technology Conference, New Orleans, Louisiana, May, | RU-IAC

Demand response (DR); Load shifting; Linear controller; Load synchronization; MATLAB/SIMULINK; Peak-to-average ratio (PAR); Real-time pricing (RTP)
1 Papers / Publications

Distribution
1 Papers / Publications

Electric vehicle (EV)
1 Papers / Publications
Ahmed A., Cintuglu M., Asfour S., Mohammed O., " Solving the Multi-Variant EV Routing Problem Incorporating V2G and G2V Options, IEEE Transactions on Transportation Electrification, September, | MI-IAC

Electricity
2 Papers / Publications
Arslan, S., Mitrovic, B., Muller, M.R., " Vortex Tube Applications in Micro Power Generation, Proceedings of the 2002 International Joint Power Generation Conference, Phoenix, Arizona, June 24-26, | RU-IAC
Kasten, D.J., Muller, M.R., Pavlovic, F., " Impact of Electricity Deregulation on Industrial Assessment Strategies, Industrial Energy Technology Conference, Houston, Texas, April, | RU-IAC

Electronics
2 Papers / Publications
Gopalakrishnan, B., Gajera, D., Athinarayanan, R., Chaudhari, S., " Process Costing of the Microchip, International Journal of Industrial and Systems Engineering, Vol. 8, No. 3, | WV-IAC
Gopalakrishnan, B., Mardikar, M., Korakakis, D., " Energy Analysis in Semi-Conductor Manufacturing, Energy Engineering Journal, Vol. 107, No. 2, | WV-IAC

Emissions
2 Papers / Publications

Energy Analysis
9 Papers / Publications
S. Long, E-H. Ng, and C. Downing eds.Tanida Chongvilaiwan, Javier Calvo-Amodio and Joe Junker, " THEORETICAL FRAMEWORK FOR THE DESIGN OF AN ENERGY ANALYSIS COLLABORATIVE STRUCTURE USING SOFT SYSTEMS METHODOLOGY , American Society for Engineering Management 2014 International Annual Conference, | OR-IAC
Gopalakrishnan, B., Mardikar, M., Gupta, D.P., Jalali, S., Chaudhari, S, " Establishing Baseline Electrical Energy Consumption in Wood Processing Sawmills: A Model Based on Energy Analysis and Diagnostics, Energy Engineering Journal, Vol. 109, No. 5, pp. 40-80, | WV-IAC
Gopalakrishnan, B., Plummer, R.W., Srinath, S., Meffe, C., Veena, R., and Ipe, J., " Energy Analysis and Diagnostics Data Analysis from Industrial Energy Assessments for Manufacturing Industries, Proceedings of the 19th National Energy Technology Conference, Houston, | WV-IAC
Ahmed, A., Buitrago, J.H., Asfour, S., " Load Pattern Classification: A Hybrid Approach, International Symposium on Advances in Power and Energy Systems, Marina del Rey, California, October, | MI-IAC
Saenz, J., Celik, N., Asfour, S., Son, Y., " Electric Utility Resource Planning using Continous-Discrete Modular Simulation and Optimization, Computers and Industrial Engineering, Vol 63, 671-694, | MI-IAC
Grant, J., " Short-term Peak Demand Forecasting Using an Artificial Neural Network with Controlled Peak Demand Through Intelligent Electical Load, Doctoral Dissertation, Miama, Florida, | MI-IAC
Avci, M., " Demand Response-Enabled Model Predictive HVAC Load Control in Buildings Using Real-Time Electricity Pricing, Doctoral Dissertation, Miama, Florida, | MI-IAC
Saenz, J., " Simulation-Based Optimization for Integrated Electric Utility Resource Planning and Deployment, Doctoral Dissertation, Miama, Florida, | MI-IAC

Energy Assessments
5 Papers / Publications
Morelli, F., and Rasmussen, B.P, " Realizing Real Time Energy Analysis for Industrial Energy Audits, Proceedings of the 2014 Industrial Energy Technology Conference, New Orleans, LA, | AM-IAC
Gopalakrishnan, B., Selvaraj, R., Turton, R., Plummer, R. W., Sukumar, S., " Systems Approach to Plant-Wide Energy Assessment, Energy Engineering Journal, Volume 102, No. 5, | WV-IAC
Gopalakrishnan, B., Plummer, R.W., Iskander, W.H., " A Comparative Study on Energy Assessment Data from Manufacturing Industry, Proceedings of the 2003 ACEEE (American Council for an Energy Efficient Economy) Summer Study on Energy Efficiency in Industry on CD ROM, ISBN 0-918249-52-X, Rye Town, New York, July, | WV-IAC
Kissock, Hallinan and Bader, " Inside-out Approach For Identifying Industrial Energy and Waste Reduction Opportunities, Journal of Strategic Planning for Energy and Environment, | UD-IAC
Choi, J. and Kissock, K, " Beyond Industrial Energy Assessments: The Life Cycle Design Perspective, ACEEE Summer Study on Energy in Industry, Niagara Falls, NY, July 23-26, | UD-IAC

Energy Awareness
2 Papers / Publications
Wu, B. and J. Abad, " Model of Collaboration to Promote Energy Efficiency, 2013 Int. Academic Conf., Paris, Paris, | MZ-IAC

Energy Economics
2 Papers / Publications
Choi, J., Hallinan, K., Kissock, K, and Brecha, R., " Economic And Environmental Impacts Of Energy Efficiency Investment On Local Manufacturers, Proceedings of the ASME 2015 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Boston, MA, August 2-5, | UD-IAC
Trombley, D. and Kissock, K., " Economics of Energy Efficiency in a Carbon Constrained World, ACEEE Summer Study on Energy in Industry, White Plains, NY, July 24-27, | UD-IAC

Energy Intensity
2 Papers / Publications
Chaudhari, S., Gupta, D., and Gopalakrishnan, B., " Using IAC Database for Longitudinal Study of Small to Medium Sized Automotive Industry Suppliers' Energy Intensity Changes, SAE International Journal of Materials and Manufacturing, Vol. 6, No. 3, pp. 427-435, | WV-IAC
Lammers, N., Kissock, K., Abels, B. and Sever, F., " Measuring Progress with Normalized Energy Intensity, 2011, SAE 2011 World Congress, Detroit, MI, April 12-14, | UD-IAC

Energy Management
12 Papers / Publications
Wu, B., " Education the next generation of energy-savvy workforce, American Journal of Engineering Education, Vol. 4, pp85-91, | MZ-IAC
Wu, B., " The Complete Cycle to Achieve Industrial Energy Efficiency – Concept, Resources, And Application, Journal of International Energy Policy – Spring 2013 Volume 2, Number 1, pp 23-30, | MZ-IAC
Khanna S., Wu, B., " A Multi-Pronged Approach to Achieving Energy Efficiency, Annual Conference of American Society of Mechanical Engineers (ASME), Washington, | MZ-IAC
Wu, B., Story, J., Tara O'Hare, " Win, Win, Win: Integrating Lean, Clean and Energy Assessments, MEP National Conference, Orlando, | MZ-IAC
Wu, B, " A State-Wide Effort to Promote Best Practices in Industrial Energy Efficiency in Missouri, Proceedings of 2009 Energy Summit, pp243-251, ACEEE, White Water, NY, | MZ-IAC
S. Long, E-H. Ng, and C. Downing eds.Tanida Chongvilaiwan, Javier Calvo-Amodio and Joe Junker, " SUSTAINABLE MANAGEMENT STRUCTURE FOR DYNAMIC NON- PROFIT ORGANIZATIONS: INTEGRATING LEAN THINKING AND  KNOWLEDGE MANAGEMENT THROUGH SYSTEMS THINKING, the American Society for Engineering Management 2014 International Annual Conference, | OR-IAC
Gopalakrishnan, B., Plummer, R.W., and Nagarajan, S., " ENERGEX: Expert Systems for Industrial Energy Conservation and Management, Energy Engineering, Journal of the Association of Energy Engineers, Vol. 94, No. 2, | WV-IAC
Kissock, J.K. and Eger, C., " Measuring Industrial Energy Savings, Journal of Applied Energy, Vol. 85, Issue 5, pp. 347-361, | UD-IAC
Eger, B. and Kissock, K., " Understanding Industrial Energy Use through Sliding Regression Analysis, ACEEE Summer Study on Energy in Industry, White Plains, NY, July 24-27, | UD-IAC
Kissock, K. and Eger, B., " Measuring Industrial Energy Savings, Society of Automotive Engineers World Congress and Exposition, Detroit, MI, April 3-6, | UD-IAC
Kissock and Seryak, " Understanding Manufacturing Energy Use Through Statistical Analysis, Industrial Energy Technology Conference, Houston, TX, | UD-IAC

Energy Metrics
2 Papers / Publications
Sekulic, D.P., Nehete, R., Yu, C-N., Fu, H., " An energy sustainability metric, Energy, Vol. 74, 2014, pp. 37-44, | UK-IAC
R. Nehete, C.-N.Yu, H. Fu, and D. P. Sekulic, " Energy Resource Use: Sustainability Metric of a Manufacturing Process, Proceedings of ECOS 2013 - The 26th International Conference of efficiency, cost, optimization, simulation and environmental impact of energy systems, July 16-19, 2013, Guilin, China, | UK-IAC

Energy Programs
5 Papers / Publications
Ganji, A. R., " Development of Energy Efficiency Programs, Implementation Process and Results - the Example of California,, 2nd International Conference on Energy Conversion and Conservation (CICME'10), Hammamet, Tunisia, April 22-25, 2010, | SF-IAC
Cullen, K., Crowe, E., Gopalakrishnan, B., Chaudhari, S., " Energy Efficiency Programs in West Virginia: A Partnership Approach, Proceedings of the Industrial Energy Technology Conference, New Orleans, | WV-IAC
Cullen, K., Crowe, E., Gopalakrishnan, B., Chaudhari, S., " Save Energy Now Regional Partnership: Advancing Energy Productivity through Government, Industrial, and University Collaboration, Proceedings of the ACEEE Summer Study on Energy Efficiency in Industry, Niagara Falls, | WV-IAC
Kissock, K.and Mulqeen, S., " Targeting Energy Efficiency Programs Using Advanced Billing Analysis, ACEEE Summer Study on Energy Efficiency in Buildings, Pacific Grove, CA, August 17–22, | UD-IAC
Raffio, G., Isambert, O., Mertz, G., Schreier, C. and Kissock, K., " Targeting Residential Energy Assistance Programs, ASME International Solar Energy Conference, Long Beach, CA, June 27-30, | UD-IAC

Energy Storage
11 Papers / Publications
MacPhee D., Dincer I., Beyene A., " Energy and Exergy Analyses of the Charging Process in Encapsulated Ice Thermal Energy Storage systems, | SD-IAC
Zheng, Y., Zhao, W., Sabol, J.C., Tuzla, K., Neti, S., Öztekin, A. and Chen, J.C., " Encapsulated Phase Change Material for Energy Storage – Characterization by Calorimetry, Solar Energy, 87, 117-126, | LE-IAC
Zhao, W., Zheng, Y., Sabol, J.C., Tuzla, K., Neti, S., Öztekin, A. and Chen, J.C, " High Temperature Calorimetry and Use of Magnesium Chloride for Thermal Energy Storage, Renewable Energy, 50, 998-993, | LE-IAC
Zhao, W., Elmozughi, A.F., Neti, S., Öztekin, A, " Heat transfer Analysis of Encapsulated Phase Change Materials for Thermal Energy Storage, International Journal of Heat and Mass Transfer, 63, 323-335, | LE-IAC
Ying, Z., Barton, J.L., Tuzla, K., Chen, J., Neti, S., Oztekin, A. and Misiolek, W, " Experimental and Computational Study of Thermal Energy Storage with Encapsulated NaNO3 for High Temperature Applications, Solar Energy 115, | LE-IAC
Zhao, W., Zheng, Y., Sabol, J.C., Öztekin, A, Neti, Tuzla, K., Misiolek, W.Z. and Chen, J.C, " Thermal Energy Storage using Zinc as Encapsulated Phase Change Material, Proceeding of ASME-IMECE 2011, | LE-IAC
Zhao, Öztekin, A, Neti, Tuzla, K., Misiolek, W.Z. and Chen, J.C, " Thermal Analysis of Encapsulated Phase Change Material for Energy Storage, Proceeding of ASME-IMECE 2011, | LE-IAC
Zhao, W., Zheng, Y., Sabol, J.C., Öztekin, A, Neti, Tuzla, K., Misiolek, W.Z. and Chen, J.C., " Thermal Energy Storage for Solar Systems using NaNO3 as Encapsulated Phase Change Materials, Proceeding of Innostock 12-th Conference on Energy Storage, Spain, | LE-IAC
Elmozughi, A., Zhao, W., Neti, S. and Öztekin, A, " Thermal Modeling of High temperature Energy Storage using Encapsulated Phase Change Materials, Proceeding of ASME-IMECE2012, Houston, | LE-IAC
Solomon, L., Elmozughi, A., Neti, S. and Öztekin, A, " High Temperature Thermal Energy Storage Using EPCM – The Effect of Void, Proceeding of ASME, Montreal, | LE-IAC
Solomon, L., Öztekin, A, Neti, S. and Jain, H, " Determination of Metal Oxides Suitable for Use in Thermal Energy Storage, Proceeding of Symposium T1S8 on Solar Thermal Conversion and Storage, CMCEE Conference,, Vancouver, BC, Canada, | LE-IAC

Energy-Water Nexus
1 Papers / Publications
Muller, M.R., Gardner, J., Muller, M.B., Shrestha, D., " The Energy-Water Nexus: Implications for Energy Efficiency, Industrial Energy Technology Conference, New Orleans, LA, | BS-IAC

Ethanol
2 Papers / Publications
Kumar, S. and Reisel, J.R., " Modelling of energy usage for the refining of ethanol from corn., International Journal of Sustainable Energy, Vol. 30, 2011, pp.98-109., | WM-IAC
Garoma T., Khaled B. M., and Beyene A., " Comparative Resource Analyses for Ethanol Produced from Corn and Sugarcane in Different Climatic Zones, Journal of Energy Research, Volume 36, Issue 10, pages 1065-1076, | SD-IAC

Fans
1 Papers / Publications
Carpenter, K. and Kissock, K., " Energy Efficient Process Heating: Managing Air Flow, Society of Automotive Engineers World Congress and Exposition, Detroit, MI, April 3-6, | UD-IAC

Filtration
7 Papers / Publications
Alkhamis, N. Oztekin, D.E., Anqi, A.E., Alsaiari, A. and Oztekin A, " Numerical Study of Gas Separation using a Membrane, Int J Heat and Mass Transfer, | LE-IAC
Anqi, A.E., Alkhamis, N. and Oztekin, A, " Numerical Simulation of Brackish Water Desalination by a Reverse Osmosis Membrane, Desalination 369, | LE-IAC
Alkhamis, N., Anqi, A.E., and Oztekin, A, " Computational Study of Gas Separation Using a Hollow Fiber Membrane, International Journal of Heat and Mass Transfer 89, | LE-IAC
Alkhamis, N., Anqi, A., Oztekin, D.E., Alsaiari, A. and Oztekin, A, " Gas Separation using a Membrane, Proceeding of ASME-IMECE2013, San Diego, | LE-IAC
Alkhamis, N., Anqi, A., Oztekin, D.E., Alsaiari, A. and Oztekin, A, " Enhancing Gas Separation Across a Membrane with Pulsating Flow, Proceeding of 10th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Orlando, | LE-IAC
Alkhamis, N. Oztekin, D.E., Anqi, A.E., Alsaiari, A. and Oztekin A, " Computational Study of Gas Separation Using Membrane Supported by a Porous Medium, Proceeding of ASME, Montreal, | LE-IAC
Anqi, A.E., Alkhamis, N., Alrehili, M.F. and Oztekin, A, " Numerical Study of Brackish Water Desalination Using Reverse Osmosis Membrane, IDAWC15, San Diego, | LE-IAC

Fluid Mechanics
18 Papers / Publications
Vempati, B, M. Panchagnula, A. Öztekin & S. Neti, " Numerical Investigation of Liquid-Liquid Co-Axial Flows, Journal of Fluid Engineering, 129, 713-719, | LE-IAC
Vempati, B, Öztekin, A. & Neti, S, " Stability of Two Layered Fluid Flows in an Inclined Channel, Acta Mechanica Volume 209 issue 3, 187-199, | LE-IAC
Vempati, B, Panchagnula, M., Öztekin, A. & Neti, S, " Combined Buoyancy and Viscous Effects in Liquid-Liquid Flows in a Vertical Pipe, Acta Mechanica (2010) DOI 10.1007/S00707-009-0191-2, | LE-IAC
Saeed, J.A. and Öztekin, A, " Flow Simulations using Thermal Lattice Boltzmann Method, Journal of Applied Mathematics, | LE-IAC
Bayraktar, S., Yayla, S., Oztekin, A. and Ma, H, " Wall Proximity Effects on Flow over Cylinders with Different Cross-Sections, Canadian Journal of Physics, 92, | LE-IAC
Quoyang, W., Wei, W., Cheng, X., Zhang, X., Webb III, E.B. and Oztekin, A, " Flow-induced Conformational Change of von Willebrand Factor Multimer, Journal of Non-Newtonian Fluid Mechanics, | LE-IAC
Goel, N., Webb III, E.B., Oztekin, A., Rickman, J.M., and Neti, S, " Kapitza Resistance at Segregated Boundaries in beta-SiC, Journal of Applied Physics 118, 115101, | LE-IAC
Almolawi, S., Oztekin, D.E. and Oztekin A, " Computational Study of Multi-phase Flows using Lattice Boltzmann Model, Canadian Journal of Physics, | LE-IAC
Liu, I., Riglin, J., Schleicher and Oztekin. A, " Flow Past a Plate in the Vicinity of a Free Surface, Ocean Engineering, | LE-IAC
J. Colistra, M. Panchagnula, A. Öztekin & S. Neti & A, " Interfacial Dynamics of Two Layer Couette Flow – Gravity Enhanced Kelvin Helmotz Instability, Proceedings of ASME FED, | LE-IAC
Vempati, B, M. Panchagnula, A. Öztekin & S. Neti, " Flow Regimes of Newtonian Fluids in Vertical Co-axial Flows, Proceeding of IMEC2006, | LE-IAC
Öztekin, A, Neti, S & Ukaew, A, " Turbulence Manipulation by Nanoparticles in Pipe Flow, Proceeding of HEFAT2010, | LE-IAC
Saeed, J.A. and Öztekin, A, " Multi-phase Flow Simulations using Lattice Boltzmann Method, Proceeding of ASME-IMECE2012, Houston, | LE-IAC
Riglin, J., Schelicher, W.C., Kraybil, Z., Klein, R.C. and Oztekin, A, " Computational Fluid Dynamics and Structural Finite Element Analysis of a Micro Hydro Turbine, Proceeding of ASME-IMECE2013, San Diego, | LE-IAC
Almalowi, S.J., Oztekin, D.E. and Oztekin, A, " Rayleigh-Taylor Instability Studied with Multi-relaxation Time Lattice Boltzmann Method, Proceeding of ASME-IMECE2013, San Diego, | LE-IAC
Bayraktar, S., Oztekin, A., Yayla, S. and Ma, H, " Computational Investigation of Unsteady Flow Past a Confined Cylinder of Various Cross-Sections, Proceeding of ICFMHTT2013-Istanbul,, Turkey, | LE-IAC
Oztekin, D.E., Almalowi, S.J. and Oztekin, A, " Computational Study of Droplets Rising Using lattice Boltzmann Model, Proceeding of 10th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics HEFAT2014-, Orlando, | LE-IAC

Food Processing
2 Papers / Publications
Wu, Y. Y., Chow, S. A. and Ganji, A. R., " Energy Efficiency Opportunities in Wineries for Retrofit and New Construction Projects,, Proceedings of the Industrial Energy Technology Conference, New Orleans, Louisiana, May 21-24, 2013, | SF-IAC
Trueblood, A. J., Wu, Y. Y. and Ganji, A. R., " Potential for Energy, Peak Demand, and Water Savings in California Tomato Processing Facilities,, Proceedings of the Industrial Energy Technology Conference, New Orleans, Louisiana, May 21-24, 2013, | SF-IAC

Fuel Cells
3 Papers / Publications
Church, B. C., Sanders Jr., T.H., Speyer, R.F. and Cochran, J.K., " Interconnect thermal expansion matching to solid oxide fuel cells., Journal of Materials Science, Vol. 40, 2005, pp.4893-4898., | WM-IAC
Church, B. C., Sanders Jr., T.H., Speyer, R.F. and Cochran, J.K., " Interconnect thermal expansion matching to solid oxide fuel cells, Journal of Materials Science, Vol. 40, 2005, pp.4893-4898, | WM-IAC
Phelps, S. and Kissock, J.K., " A Feasibility Study of Fuel Cell Cogeneration in Industry, Industrial Energy Technology Conference, Houston, TX, | UD-IAC

General Energy Efficiency
22 Papers / Publications
Mehta, D. Paul, " Thermal Sciences, Digital Technologies, and Energy Efficiency, Proceedings of the International Conference on Heat Transfer, Fluid Mechanics, and Thermodynamics (HEFAT), Orlando, FL, July 14-16, 2014, | BD-IAC
Mehta, D. Paul & Albert Thumann, " Energy Engineering Handbook. 7th Edition, Prentice Hall, 2013, | BD-IAC
Mehta, D. Paul, " Applications of Advanced Transport Membranes for Energy Efficiency, World Energy Congress (WEEC), Washington, D. C, 2009, | BD-IAC
Mehta, D. Paul, " Impact of Industrial Assessment Centers on Energy Engineering Education., ASME IMECE, Orlando, FL, 2009, | BD-IAC
Ganji, A. R, " Energy Audit – An Effective Method for Promotion of Energy Efficiency,, Paper presented at the Training Workshop on Renewable Energy Technologies for a Clean Sustainable Development, University of Jordan, Amman, Jordan, 37316, | SF-IAC
Bin Wu, Sandina Ponte, and Chatchai Pinthuprapa, " Institutionalization of Industrial Best Practice of Energy Efficiency: The Case of a Global Manufacturing Organization, Periodical of Applied Mechanics and Materials Vols. 316-317 (2013) pp 91-94, Trans Tech Publications, Switzerland, | MZ-IAC
Wu, B, " How to improve energy efficiency in the manufacturing sector, Annual MUPA conference, | MZ-IAC
Wu, B, " The Complete Cycle to Institutionalize Energy Efficiency – Conceptual Framework, Tools, and Industrial Cases, Proceeding of Annual Conference of ACEEE, June, Niagara Falls, | MZ-IAC
Wu, B., Sandina Ponte, " Institutionalizing Energy Efficiency within the Manufacturing Industry: a Computer-Aided Framework for ISO50001, Proceedings of 2nd International Conference on Environment and Industrial Innovation (ICEII2012), Hong Kong, | MZ-IAC
Wu, B., J. Wibbenmeyer, A. Khoshkhoo, " Setting Achievable Goals for Industrial Energy Efficiency – a Structured Approach, Proceedings of International Academic Conference, Maui, | MZ-IAC
Bin Wu, Sandina Ponte and Chatchai Pinthuprapa, " Institutionalization of Industrial Best Practice of Energy Efficiency: The Case of a Global Manufacturing Organization, Proceedings of International Conference of Energy and Environmental Engineering (ICEEEE 2013), E253, | MZ-IAC
Chaudhari, S., Gupta, D.P., Gopalakrishnan, B., " Investigation of Relationship between System Efficiency Curve and Measurement and Verification (M&V) of Energy Savings, International Journal of Materials and Manufacturing, June 2011 Vol. 4 No. 1 pg. 486-494, | WV-IAC
Gopalakrishnan, B., Gupta, D.P., Mardikar, Y., Chaudhari, S., " Industrial Energy Efficiency, Handbook of Environmentally Conscious Manufacturing, | WV-IAC
Bhadra, S., Gopalakrishnan, B., Chaudhari, S., " Energy Efficiency in Continuous Galvanizing Lines, Proceedings of the International Renewable and Sustainable Energy Conference (IRSEC’13), Ouarzazate, Morocco, | WV-IAC
Chaudhari, S., Gupta, D.P., Gopalakrishnan, B., " Investigation of Relationship between System Efficiency Curve and Measurement and Verification (M&V) of Energy Savings, Proceedings of the Society of Automotive Engineers World Congress, Detroit, Michigan, | WV-IAC
Gopalakrishnan, B., Chavan, R., " Benchmarking of Energy Consumption in Continuous Galvanizing Lines, Proceedings of the Intelligent Systems in Design and Manufacturing VI Conference, Boston, MA, | WV-IAC
Gopalakrishnan, B., Alkadi, N.M., Plummer, R.W., " Design for Energy: An Inverted Pyramid Approach, Proceedings of the Industrial Energy Technology Conference, Houston, | WV-IAC
Raffio, T., Abels, B., Zhang, H. and Kissock, K, " Integrated Systems Plus Principles Approach and Energy Efficiency Guidebook, ACEEE Summer Study on Energy in Industry, Niagara Falls, NY, July 23-26, | UD-IAC
Brecha, R. J., Mitchell, A., Hallinan, K. P., Kissock, J. K., " Prioritizing Investment in Residential Energy Efficiency and Renewable Energy - A Case Study for the US Midwest, Energy Policy, 39(5), 2982–2992, | UD-IAC
Muller, M.R., " The Return of the Steam Engine, ASEEE Summer Study on Energy Efficiency in Industry, Westchester, New York, July, | RU-IAC

Generation
1 Papers / Publications
Arslan, S., Mitrovic, B., Muller, M.R., " Vortex Tube Applications in Micro Power Generation, Proceedings of the 2002 International Joint Power Generation Conference, Phoenix, Arizona, June 24-26, | RU-IAC

Genetic algorithm
1 Papers / Publications
Ahmed, A., Asfour, S., " A Fuzzy Genetic Algorithm Classifier: The Impact of Time-Series Load Data Temporal Dimension on Classification Performance, Machine Learning and Applications (ICMLA), 2016 15th IEEE International Conference on, Anaheim, CA, 18-20 Dec. 2016 , | MI-IAC

Geothermal
1 Papers / Publications
Beyene A., Muleta K.M., " Water Extraction, Ground Thermal Loss, and Land Subsidence: are Geothermal-plants Sustainable?, Proceedings of ECOS, 24rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, China, | SD-IAC

Glass
2 Papers / Publications
Gopalakrishnan, B., R.W. Plummer, N.M. Alkadi, " Analysis of Energy Conservation Opportunities in Glass Manufacturing Facilities, Energy Engineering, Journal of the Association of Energy Engineers, Vol. 98, No. 6, | WV-IAC
Gopalakrishnan, B., R.W. Plummer, N.M. Alkadi, " Comparison of Glass Manufacturing Facilities based on Energy Consumption and Plant Characteristics, Journal of Energy and Development, Vol. 27, No. 1, | WV-IAC

Greenhouse Gas Emissions
2 Papers / Publications
Zevenhoven R., Beyene, A., " The Impact of Waste Heat Rejection on Global Warming Greenhouse Gas Emissions or of Heat-up of the Surrounding by Power Plants, Energy, Volume 36: 6, | SD-IAC
Zevenhoven R., Beyene A., " Global warming: a result of greenhouse gas emissions or of heat-up of the surroundings by power PLANTS, Proceedings of ECOS 2009, 22nd International Conference on Efficiency, Cost, Optimization, Simulation, and Environmental Impact of Energy Systems, Brazil, | SD-IAC

HVAC
20 Papers / Publications
Wolfe, D. and Goossen, K.W., " Active Modulated Reflectance Roofing System to Tailor Building Solar Loads for Increased HVAC Efficiency, ASME 2014 8th International Conference on Energy Sustainability, ES-FuelCell 2014-6386, | DL-IAC
J. Burbank, J. Marmaras and D. Kosanovic, " Dedicated Outside Air System (DOAS) - Design vs. Actual Operation (Are Aggressive Energy Targets Achievable?), 2013 ASHRAE Winter Conference, Dallas, Texas, January 26-30, 2013, | MA-IAC
Elliott, M.S., and Rasmussen, B.P, " Optimal Setpoints for HVAC Systems via Iterative Cooperative Neighbor Communication, ASME Journal of Dynamic Systems, Measurement, and Control, vol 137, no. 1, pp TBD, | AM-IAC
Rasmussen, B.P., and Shenoy, B., " Review Article: Dynamic Modeling of Vapor Compression Systems – Part II: Simulation Tutorial, HVAC&R Research, vol. 18, no. 5, pp. 956-973, | AM-IAC
Lim, DW, Rasmussen, B.P., and Swaroop, D., " Selecting PID Control Gains for Nonlinear HVAC Systems, HVAC&R Research, vol. 15, no. 6, pp. 991-1020, | AM-IAC
Price, C., and Rasmussen, B.P, " Compensation of HVAC System Nonlinearities Using Cascaded Control Architecture, Proceedings of the 2014 Dynamic Systems and Control Conference, DSCC2014-6127, San Antonio, TX, | AM-IAC
Chintala, R., Bay, C., and Rasmussen, B.P, " Automated Modeling of Building HVAC Systems for MPC, Proceedings of the 2014 Dynamic Systems and Control Conference, DSCC2014-6224, San Antonio, TX, | AM-IAC
Elliott, M.S., Bay, C., and Rasmussen, B.P, " Pareto Optimal Setpoints for HVAC Networks via Iterative Nearest Neighbor Communication, Proceedings of the 2013 ASME Dynamic Systems and Control Conference, Palo Alto, CA, | AM-IAC
Elliott, M.S., and Rasmussen, B.P., " Neighbor-Communication Model Predictive Control and HVAC Systems, 2012 American Control Conference, Montreal, Canada, | AM-IAC
Hariharan, N., and Rasmussen, B.P, " Parameter Estimation of HVAC Model with Limited Sensors, 2010 American Control Conference, Baltimore, MD, | AM-IAC
Elliott, M.S., and Rasmussen, B.P, " A Model-Based Predictive Supervisory Controller for Multi-Evaporator HVAC Systems, 2009 American Control Conference, St. Louis, MO, | AM-IAC
Gupta, A., and Rasmussen, B.P., " Parameter Tuning of Reduced Order Evaporator Models via Numerical Model Reduction, 2008 American Control Conference, Seattle, WA, | AM-IAC
Rasmussen, B.P., Uribe, T., Alleyne, A., and Bullard, C., " Evaluation of Control Strategies for Compressor Rapid Cycling, Society of Automotive Engineers 2004 World Congress, Detroit, Michigan, | AM-IAC
Rasmussen, B.P., Alleyne, A., and Shah, R., " Reduced Order Modeling of Transcritical AC System Dynamics Using Singular Perturbation, 2003 American Control Conference, Denver, CO, | AM-IAC
Rasmussen, B., Alleyne, A., Bullard, C., Hrnjak, P., and Miller, N., " Control-Oriented Modeling and Analysis of Automotive Transcritical AC System Dynamics, 2002 American Control Conference, Anchorage, AK, | AM-IAC
Ma, Y., Tukur, A., and Kissock, K., " Energy Efficient Static Pressure Reset in VAV Systems, ASHRAE Transactions, CH-15-010, | UD-IAC
Avci, M., Erkoc, A., Rahmani, Asfour, S., " Model Predictive HVAC Load Control in Buildings Using Real-Time Electricity Pricing, Energy and Buildings, Vol 60, 199-209, | MI-IAC
Luthman, H. and J.F. Gardner, " Parameter Estimation for HVAC System Models from Standard Test Data, Proceedings of the ASME 2016 International Mechanical Engineering Congress & Exposition, PHoenix, AZ, November 11-17, | BS-IAC

Healthcare Energy Use
2 Papers / Publications

Heat Exchanger
1 Papers / Publications
Eldredge, B.D., Rasmussen, B.P., and Alleyne, A., " Moving-Boundary Heat Exchanger Models with Variable Outlet Phase, ASME Journal of Dynamic Systems, Measurement, and Control, vol. 130, no. 6, | AM-IAC

Heat Pump
3 Papers / Publications
J. Marmaras, J. Burbank and D. Kosanovic, "  Ground Source Heat Pump Operation and Optimal Entering Liquid Temperature, 2013 ASHRAE Winter Conference, Dallas, Texas, January 26-30, 2013, | MA-IAC
Lewis, NB; Simon, MJ; Terry, SD, " Industrial Heat Pumps – A Reexamination in Light of Current Energy Trends, Industrial Energy Technology Conference, New Orleans, LA, | NC-IAC
Muller, M.R., Betin, S.K., Dillon, J.M., " Applications, Economics and Scalability of Heat Pumps in Waste Water Treatment Plants and Energy Intensive Industries, ASEEE Summer Study on Energy Efficiency in Industry, Niagara Falls, New York, July, | RU-IAC

Heat Transfer
14 Papers / Publications
Czél, B., Woodbury, K. A, Woolley, J. W., and Gróf, G., " Analysis of Parameter Estimation Possibilities of the Thermal Contact Resistance Using the Laser Flash Method with Two-layer Specimens, International Journal of Thermophysics, Oct 2013, Vol. 34 Issue 10, p1993-2008, | UA-IAC
Mirza, K. and Kissock, K., " An Analytical Solution for Determining Dynamic Thermal Loads through Walls, ASME International Solar Energy Conference, Long Beach, CA, June 27-30, | UD-IAC
Zhao, W, Neti, S & Öztekin, " Heat Transfer Analysis of Encapsulated Phase Change Materials, Applied Thermal Engineering, 50 issue 1, 143-151, | LE-IAC
Coscia, K., Elliot, T., Mohapatra, S., Öztekin, A. and Neti, S, " Binary and Ternary Nitrate Solar Heat Transfer Fluids, Journal of Solar Energy Engineering, | LE-IAC
Elmozughi, A.F., Solomon, L., Neti, S., Öztekin, A, " Encapsulated Phase Change Material for High temperature Thermal Energy Storage – Heat Transfer Analysis, International Journal of Heat and Mass Transfer, 78, | LE-IAC
Ma, H., Oztekin, D.E., Bayraktar, S., Yayla, S. and Oztekin, A, " Computational Fluid Dynamics and Heat Transfer Analysis for a Novel Heat Exchanger, Journal of Heat Transfer 137(5), | LE-IAC
Coscia, K., Neti, S., Öztekin, A, Nelle, S., Mohapatra, S. and Elliot, T, " The Thermophysical Properties of the NaK, LiNa and LiK Nitrate Salt Systems, Proceeding of ASME-IMECE 2011, | LE-IAC
Coscia, K., Elliot, T., Nelle, S., Mohapatra, S., Öztekin, A, and Neti, S, " The Heat Transfer Characteristics and Phase modeling of Molten Binary Nitrate Salt Systems, Proceeding of Solar PACE 2011, | LE-IAC
Zhao, W., Zheng, Y., Sabol, J.C., Öztekin, A, Neti, Tuzla, K., Misiolek, W.Z. and Chen, J.C, " Heat Transfer Analysis for Thermal Energy Storage Using NaNO3 as Encapsulated Phase Change Material, Proceeding of ASME-HT2012, Puerto Rico, | LE-IAC
Coscia, K., Neti, S., Öztekin, A, Nelle, S., Mohapatra, S. and Elliot, T, " Ternary Molten Salt Heat Transfer Fluid for Energy Applications, Proceeding of ASME-HT2012, Puerto Rico, | LE-IAC
Coscia, K., Elliot, T., Neti, S., Öztekin, A. and Mohapatra, S, " Analytical Modeling and Experimental Measurements of Ternary Molten Salt Heat Transfer Fluid for Energy Applications, Proceeding of ASME-IMECE2012, Houston, | LE-IAC
Zhao, W., Elmozughi, A., Neti, S. and Öztekin, A, " Transient 2-D Heat Transfer Analysis of Encapsulated Phase Change Materials, Proceeding of ASME-IMECE2012, Houston, | LE-IAC
Ma, H., and Oztekin, A, " Flow and Heat Transfer Characteristics of a Novel Heat Exchangers, Proceeding of ASME-IMECE2013, San Diego, | LE-IAC

IAC
3 Papers / Publications
Gopalakrishnan, B., Gupta, D., " Insulation Recommendations for Manufacturing Facilities From An Industrial Assessment Center, Insulation Outlook, The Official Journal of the National Insulation Association, | WV-IAC
Gopalakrishnan, B., Plummer, R.W., Srinath, S., Meffe, C., Veena, R., and Ipe, J., " Energy Analysis and Diagnostics Data Analysis from Industrial Energy Assessments for Manufacturing Industries, Proceedings of the 19th National Energy Technology Conference, Houston, | WV-IAC
Beyene A., " Energy Efficiency Opportunities, for the Industrial Sector, IAC Experience, Association of Energy Engineers, West Coast Energy Management Congress, Long Beach, CA, | SD-IAC

IAC Database
1 Papers / Publications
Chaudhari, S., Gupta, D., and Gopalakrishnan, B., " Using IAC Database for Longitudinal Study of Small to Medium Sized Automotive Industry Suppliers' Energy Intensity Changes, SAE International Journal of Materials and Manufacturing, Vol. 6, No. 3, pp. 427-435, | WV-IAC

ISO50001
2 Papers / Publications
Wu, B., Sandina Ponte and A. Khoshkhoo, " Computer-Aided Adaptation of Superior Energy Performance and ISO50001, 2013 International Academic Conference, Paris, | MZ-IAC
Gopalakrishnan, B., Ramamoorthy, K., Crowe, E., Chaudhari, S., Latif, H., " A Structured Approach for Facilitating the Implementation of ISO 50001 Standard in the Manufacturing Sector, Sustainable Energy Technologies and Assessments Journal, Vol. 7, pp. 154–165, | WV-IAC

Information Sharing
1 Papers / Publications
John Thornton,Pamela Barrow, Larry Blaufus and Sam Walker, Todd Amundson, Jerry Harris and Steve Martin, Tim McMenamin, Joe Junker, Bonnie Moore, Elizabeth Scott, " COLLABORATION ACROSS ORGANIZATIONAL BOUNDARIES: A SUCCESSFUL MODEL  OF INDUSTRY SHARING TO IMPROVE COMPETITIVENESS, the 2013 ACEEE Summer Study on Energy Efficiency in Industry, | OR-IAC

Insulation
3 Papers / Publications
Gopalakrishnan, B., Gupta, D., " Insulation Recommendations for Manufacturing Facilities From An Industrial Assessment Center, Insulation Outlook, The Official Journal of the National Insulation Association, | WV-IAC
Gopalakrishnan, B., " Insulation’s Effectiveness in Industrial Facilities, Insulation Outlook, The Official Journal of the National Insulation Association, Vol. 48, | WV-IAC
Carpenter, K. and Kissock, K., " Energy Efficient Process Heating: Insulation and Thermal Mass, Society of Automotive Engineers World Congress and Exposition, Detroit, MI, April 3-6, | UD-IAC

Lean Energy Analysis
3 Papers / Publications
Abels, B., Sever, F., Kissock, K. and Ayele, D., " Understanding Industrial Energy Use through Lean Energy Analysis, SAE 2011 World Congress, Detroit, MI, April 12-14, | UD-IAC
Seryak, J. and Kissock, K., " Lean Energy Analysis: Guiding Energy Reduction Efforts to Theoretical Minimum Energy Use, ACEEE Summer Study on Energy in Industry, July 19-22, | UD-IAC
Kissock and Seryak, " Lean Energy Analysis: Identifying, Discovering And Tracking Energy Savings Potential, Advanced Energy and Fuel Cell Technologies Conference, Society of Manufacturing Engineers, Livonia, MI, | UD-IAC

Lighting
8 Papers / Publications
Preston, D. J., and Woodbury, K. A., " Cost-Benefit Analysis of Retrofit of Industrial High Intensity Discharge Lighting with Energy-Saving Alternatives, Energy Efficiency, vol. 6 issue 2 May 2013, p. 255 – 269, | UA-IAC
Bay, C., Terrill, T., and Rasmussen, B.P, " Autonomous Lighting Audits: Part 1 - Building Navigation and Mapping, Proceedings of the 2014 Dynamic Systems and Control Conference, DSCC2014-6126, San Antonio, TX, | AM-IAC
Terrill, T., Bay, C., and Rasmussen, B.P, " Autonomous Lighting Audits: Part 2 - Light Identification and Analysis, Proceedings of the 2014 Dynamic Systems and Control Conference, DSCC2014-6126, San Antonio, TX, | AM-IAC
Terrill, T., Bay, C., and Rasmussen, B.P, " Automation of a Lighting Analysis and Retrofit Report in an Energy Assessment, Proceedings of the 2014 Industrial Energy Technology Conference, New Orleans, LA, | AM-IAC
Venable, K., Bhatia, D., Coverick, R., Gutierrez, C., Knight, J., McGarry, D., McGee, K., Pate, H., Smith, Z., Terrill, T.J., Vanderford, B., Weiser, R., Wightman, K., Rasmussen, B., " Image Recognition System for Automated Lighting Retrofit Assessment, Industrial Energy Technology Conference Proceedings, | AM-IAC
Syed, R., Kleinhenz, P. and Kissock, K., " Net Energy Costs of Skylights, ACEEE Summer Study on Energy in Industry, White Plains, NY, July 24-27, | UD-IAC
Kissock, K., " A Hybrid Method For Estimating Natural Lighting Potential In Buildings, ASME International Solar Energy Conference, Portland, OR, | UD-IAC
Fonseca, D.J., Bisen, K., Midkiff, C.K. and Moynihan, G.P., " An Expert System for Lighting Energy Management in Public School Facilities, Expert Systems 23: 194-211, 2006, | UA-IAC

Lubrication
9 Papers / Publications
Wornyoh, E.Y.A. and Higgs, C.F. (2011)., " An asperity-based fractional coverage model for transfer films on a tribological surface., Wear, Vol. 270, 2011, pp.127-139., | WM-IAC
Wornyoh, E.Y.A., Patel, D. and Schuessler, L., " An In Situ Mechanism for the Optimal Cooling of Oil-Lubricated Rolling Element Bearings and Planetary Gear Systems., ASME 2011 International Mechanical Engineering Congress and Exposition, Paper No. IMECE2011-64614, 2011, pp.71-80., | WM-IAC
Wornyoh, E.Y.A., Patel, D., Schuessler, L., Francis, A. and Garnett, C., " Improving Rolling Element Bearing Thermal Compliance Through In Situ Cooling., ASME/STLE 2011 International Joint Tribology Conference, American Society of Mechanical Engineers, Paper No. IJTC2011-61210, 2011, pp.245-247., | WM-IAC
Higgs, C. F. and Wornyoh, E.Y.A., " An in situ mechanism for self-replenishing powder transfer films: Experiments and modeling., Wear, Vol. 264, 2008, pp.131-138., | WM-IAC
Wornyoh, E.Y.A., Jasti, V.K. and Higgs, C.F., " A review of dry particulate lubrication: Powder and granular materials., Journal of Tribology-Transactions of the Asme, Vol.129, 2007, pp.438-449., | WM-IAC
Wornyoh, E.Y.A. and Higgs, C.F., " An asperity-based fractional coverage model for transfer films on a tribological surface., Wear, Vol. 270, 2011, pp.127-139, | WM-IAC
Wornyoh, E.Y.A., Patel, D. and Schuessler, L., " An In Situ Mechanism for the Optimal Cooling of Oil-Lubricated Rolling Element Bearings and Planetary Gear Systems, ASME 2011 International Mechanical Engineering Congress and Exposition, Paper No. IMECE2011-64614, 2011, pp.71-80, | WM-IAC
Higgs, C. F. and Wornyoh, E.Y.A., " An in situ mechanism for self-replenishing powder transfer films: Experiments and modeling, Wear, Vol. 264, 2008, pp.131-138, | WM-IAC
Wornyoh, E.Y.A., Jasti, V.K. and Higgs, C.F., " A review of dry particulate lubrication: Powder and granular materials, Journal of Tribology-Transactions of the Asme, Vol.129, 2007, pp.438-449, | WM-IAC

Machining
1 Papers / Publications
Li, T.H., Yuan, C.*, " Numerical modeling of specific energy consumption in machining process, 2013 ASME International Manufacturing Science and Engineering Conference, Madison, WI, June 10-14, 2013, | WM-IAC

Maintenance
1 Papers / Publications
Gopalakrishnan, B., Chandrasekharan, A, " Maintenance Risk Reduction for Effective Facilities Management, Journal of Facilities Management, Vol. 6, No. 1, | WV-IAC

Markov decision process (MDP)
1 Papers / Publications
Ahmed A., Cintuglu M., Asfour S., Mohammed O., " Solving the Multi-Variant EV Routing Problem Incorporating V2G and G2V Options, IEEE Transactions on Transportation Electrification, September, | MI-IAC

Mechanical Power
8 Papers / Publications
Schleicher, W., Ma, H., Riglin, J., Kraybil, Z., Wei, W., Klein, R. and Oztekin, A, " Characterization of a Micro Hydro Turbine, Journal of Renewable and Sustainable Energy, | LE-IAC
Riglin, J., Schleicher, W.C. and Oztekin. A., " Numerical Analysis of a Shrouded Micr-hydrokinetic Turbine Unit, Journal of Hydraulic Research, | LE-IAC
Riglin, J., Schleicher, W.C. and Oztekin. A, " Cavitation Phenomena and Performance Implications in Archimedes Flow Turbines, Journal of Fluid Eng, | LE-IAC
Riglin, J., Schleicher, W.C., Liu, I. and Oztekin. A, " Characterization of a Micro-hydrokinetic Turbine in Close Proximity to the Surface, Ocean Engineering 110 (2015) 270-280, | LE-IAC
Schelicher, W.C., Riglin, J., Kraybil, Z., Klein, R.C. and Oztekin, A, " Design, Simulations, Test and Cavitation Analysis of Micro Hydrokinetic Turbines / Arrays of Turbines, Marine Energy Technology Symposium, | LE-IAC
Schelicher, W.C., Riglin, J. and Oztekin, A, " Numerical Optimization and Design Improvements of a Portable Hydrokinetic Turbine, Marine Energy Technology Symposium, | LE-IAC
Riglin, J., Schelicher, W.C. and Oztekin, A, " Diffuser Optimization for a Micro Hydrokinetic Turbine, Proceeding of ASME, Montreal, | LE-IAC

Metal
16 Papers / Publications
R. Nehete, C.-N. Yu and D. P. Sekulic, " Limits of energy resources use in traditional technological processes: A general approach and a metal bonding case study, Proceedings of the International Symposium on Sustainable Systems & Technologies ISSST2013, May 15-17 2013, Cincinnati, OH, | UK-IAC
Lopez, H.F., Mendoza, H., and Church, B., " High-Temperature Oxidation Resistance of a Nanoceria Spray-Coated 316L Stainless Steel Under Short-Term Air Exposure., Metallurgical and Materials Transactions A, Vol 45, 2013, pp.1362-1370., | WM-IAC
Nosonovsky, M., Amano, R., Lucci, J.M. and Rohatgi, P.K., " Physical chemistry of self-organization and self-healing in metals., Physical Chemistry Chemical Physics, Vol.11, 2009, pp.9530-9536., | WM-IAC
Daoud, A., El-Khair, M.T.A., Shenouda, A.Y., Mohammed, E. and Rohatgi, P.K., " Microstructure, tensile properties and electrochemical behavior of Pb alloy–45vol.% fly ash microballoon composites., Materials Science and Engineering: A Vol.526, 2009, pp.225-234., | WM-IAC
Itskos, G., Rohatgi, P.K., Moutsatsou, A., DeFouw, J., Koukouzas, N., Vasilatos, C. and Schultz, B., " Synthesis of A356 Al–high-Ca fly ash composites by pressure infiltration technique and their characterization., Journal of Materials Science Vol.47, 2012, pp.4042-4052., | WM-IAC
Amano, R. S. and Rohatgi, P.K., " Laser engineered net shaping process for SAE 4140 low alloy steel., Materials Science and Engineering: A, Vol.528, 2011, pp.6680-6693., | WM-IAC
Ferguson, J.B., Sheykh-Jaberi, F., Kim, C.-S., Rohatgi, P.K. and Cho, K., " On the strength and strain to failure in particle-reinforced magnesium metal-matrix nanocomposites (Mg MMNCs)., Materials Science and Engineering: A 558, 2012, pp.193-204., | WM-IAC
Kim, C.-S., Sohn, I., Nezafati, M., Ferguson, J.B., Schultz, B., Bajestani-Gohari, Z., Rohatgi, P.K. and Cho, K., " Prediction models for the yield strength of particle-reinforced unimodal pure magnesium (Mg) metal matrix nanocomposites (MMNCs)., Journal of Materials Science, Vol.48, 2013, pp.4191-4204., | WM-IAC
Lipke, D.W., Zhang, Y., Liu, Y., Church, B.C., and Sandhage, K.H., " Near net-shape/net-dimension ZrC/W-based composites with complex geometries via rapid prototyping and Displacive Compensation of Porosity., Journal of the European Ceramic Society, Vol. 30, 2010, pp: 2265-2277., | WM-IAC
Church, B.C., Sanders, T.H., Speyer, R.F., and Cochran, J.K., " Thermal expansion matching and oxidation resistance of Fe-Ni-Cr interconnect alloys., Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing Vol. 452, 2007, pp.334-340., | WM-IAC
Ahmad, G., Dickerson, M.B., Church, B.C., Cai, Y., Jones, S.E., Naik, R.R., King, J.S., Summers, C.J., Kröger, N. and Sandhage, K.H., " Rapid, Room-Temperature Formation of Crystalline Calcium Molybdate Phosphor Microparticles via Peptide-Induced Precipitation., Advanced Materials, Vol. 18, 2006, pp.1759-1763., | WM-IAC
Ernst, E. M., Church, B.C., Gaddis, C.S., Snyder, R.L. and Sandhage K.H., " Enhanced hydrothermal conversion of surfactant-modified diatom microshells into barium titanate replicas., Journal of Materials Research, Vol. 22, 2007, pp.1121-1127., | WM-IAC
Church, B.C., Sanders, T.H., Speyer, R.F., and Cochran, J.K., " Thermal expansion matching and oxidation resistance of Fe-Ni-Cr interconnect alloys, Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing Vol. 452, 2007, pp.334-340, | WM-IAC
Crowe, E., Gopalakrishnan, B., Cullen, K., Chaudhari, S., " Results of an Enhanced Save Energy Now (SEN) Energy Assessment, A Case Study of a Steel Mini-Mill, Proceedings of the Industrial Energy Technology Conference, New Orleans, | WV-IAC

Metal Plating
3 Papers / Publications
Li, B.B., Gao, X.F, Zhang, H.C., Yuan, C., " Energy Modeling of Electrochemical Anodization Process of Titanium Dioxide Nanotubes, ACS Sustainable Chemistry and Engineering, 2014, 2 (3), pp 404–410., | WM-IAC
Wang, E.D., Yuan, C., " A Hybrid Life Cycle Assessment of Atomic Layer Deposition Process, Journal of Cleaner Production, Volume 74, 2014, Pages 145–154., | WM-IAC
Yuan, C. and Dornfeld, D., " Integrated Sustainability Analysis of Atomic Layer Deposition for Microelectronics Manufacturing, ASME Journal of Manufacturing Science and Engineering, | WM-IAC

Metal Wetting
2 Papers / Publications
H. Fu, F. Dong, D.P. Sekulic, S.Dj. Mesarovic, M. Krivilyov, " Surface Tension Driven Kinetics of the Triple Line of a Liquid Metal Free Surface, Proceedings of the ASME 2013 International Mechanical Engineering Congress & Exposition, IMECE2013, November 13-21, 2013, San Diego, California, | UK-IAC
Hejazi, V., Nyong, A.E., Rohatgi, P.K. and Nosonovsky, M., " Wetting Transitions in Underwater Oleophobic Surface of Brass., Advanced Materials, Vol.24, 2012, pp.5963-5966., | WM-IAC

Microparticles
2 Papers / Publications
Ahmad, G., Dickerson, M.B., Church, B.C., Cai, Y., Jones, S.E., Naik, R.R., King, J.S., Summers, C.J., Kröger, N. and Sandhage, K.H., " Rapid, Room-Temperature Formation of Crystalline Calcium Molybdate Phosphor Microparticles via Peptide-Induced Precipitation, Advanced Materials, Vol. 18, 2006, pp.1759-1763., | WM-IAC
Ernst, E. M., Church, B.C., Gaddis, C.S., Snyder, R.L. and Sandhage K.H., " Enhanced hydrothermal conversion of surfactant-modified diatom microshells into barium titanate replicas, Journal of Materials Research, Vol. 22, 2007, pp.1121-1127, | WM-IAC

Modeling
3 Papers / Publications
Alleyne, A., Rasmussen, B.P., Keir, M., and Eldredge, B.E., " Advances in Energy Systems Modeling and Control, 2007 American Control Conference, New York, NY, | AM-IAC
Gopalakrishnan, B., Chavan R., Gupta, D.P., Alkadi, N., " Energy Consumption Modeling and Benchmarking in Continuous Galvanising Lines, International Journal of Energy Technology and Policy, | WV-IAC
Moynihan, G.P. and Triantifilu, D., " Energy Savings for a Manufacturing Facility Using Building Simulation Modeling, Engineering Management Journal, 24:73-84, 2012, | UA-IAC

Motors
3 Papers / Publications
Devaru, D.G., Maddula R., Grushecky, S., Gopalakrishnan, B, " Motor-Based Energy Consumption in West Virginia Sawmills, Forest Products Journal, Vol. 64, No. ½, pp. 33-40, | WV-IAC
Munisamy, A., Gopalakrishnan, B., Chaudhari, S., Jaridi, M., Crowe, E., Gupta, D.P., " A Computer Based Total Productive Maintenance Model for Electrical Motors, International Journal of Productivity and Quality Management, | WV-IAC
Gopalakrishnan, B., Chaudhari, S., Famouri, P., Plummer, R. W., " Facilitation for Load Based Energy Savings in Three Phase Squirrel Cage Induction Motors, Energy Engineering Journal, Vol. 103, No. 6, Oct/Nov, | WV-IAC

Nanotechnology
10 Papers / Publications
Li, B.B., Gao, X.F, Zhang, H.C., Yuan, C., " Energy Modeling of Electrochemical Anodization Process of Titanium Dioxide Nanotubes, ACS Sustainable Chemistry and Engineering, 2014, 2 (3), pp 404–410., | WM-IAC
Kim, C.-S., Sohn, I., Nezafati, M., Ferguson, J.B., Schultz, B., Bajestani-Gohari, Z., Rohatgi, P.K. and Cho, K., " Prediction models for the yield strength of particle-reinforced unimodal pure magnesium (Mg) metal matrix nanocomposites (MMNCs)., Journal of Materials Science, Vol.48, 2013, pp.4191-4204., | WM-IAC
Zevenhoven R., Beyene A., " Exergy of Nano-Particulate Materials, International Journal of Thermodynamics, | SD-IAC
Zevenhoven R., Beyene A., " Exergy of nano-particulate materials, Proceedings of ECOS, 24rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, China, | SD-IAC
Yang, Y, Mohapatra, S, Neti, S & Öztekin, A, " Particle agglomeration and properties of nanofluids, Journal of NanoParticles Research 14(5), | LE-IAC
Zhao, C., Öztekin, A. and Cheng, X, " Gravity Induced Swirl of Nanoparticles in Microfluidics, Journal of Nanoparticle Research, 15 issue 5, 1-14, | LE-IAC
Zhao, C., Jinxin, F., Oztekin A. and Cheng, X, " Measuring Soret Coefficient of Nanoparticle in a Dilute Suspension, Journal of Nanoparticle Research, | LE-IAC
Krisna, H.K., Neti, S., Oztekin, A and Mohapatra, S, " Modeling of Particle Agglomeration in Nanofluids, Journal of Applied Physics 117 094304, | LE-IAC
Yang, Y., Öztekin, A, Neti, S & Mohapatra, S, " Characterization and Convective Heat Transfer with Nanofluids, Proceeding of AJTEC2011- ASME/JSME 8-th Thermal Engineering Joint Conference, | LE-IAC

Net Zero
2 Papers / Publications
Morelli, F., Abbarno, N., 2Bullock, J., Boese, E., 2Carter, B., 2Edwards, R., 2Mulvihill, C., 2Lapite, O., 2Mann, D., 2Purcell, E., and 2Stein IV, M., Rasmussen, B.P, " Design and Predictive Control of a Net Zero Energy Home, Industrial Energy Technology Conference Proceedings, | AM-IAC
Pohlman, D., Smith, J., Kissock, K., " Net-Zero Carbon Manufacturing At Net-Zero Cost, World Renewable Energy Forum, Denver, CO, May 13-17, | UD-IAC

On-site Generation
1 Papers / Publications
T. Kanitkar and D. Kosanovic, " Evaluation of the Contribution of On-Site Generation to Grid and Customer Reliability, SAE International Journal of Materials and Manufacturing. June 2011 4:468-476, 40695, | MA-IAC

Organic Rankine Cycle
6 Papers / Publications
Zaviani D., Venturini M., Beyene A., " Comparison of a single screw and scroll expander under part-load conditions for low-grade heat recovery ORC systems, ICAE2014, Taiwan, | SD-IAC
Shahinfard S., Beyene A., " Selection of organic working mediums using regression analysis, Proceedings of ECOS, 24rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, China, | SD-IAC
Ziviani D., Beyene A., Venturini M, " Application of an Advanced Simulation Model to a Micro-CHP ORC-Based System for Ultra-Low Grade Heat Recovery, Proceedings of IMECE 2012 International Mechanical Engineering Congress & Exposition, Houston, Texas, | SD-IAC
Ziviani D., Beyene A., Venturini M, " Development and Validation of an Advanced Simulation Model for ORC-Based System, Proceedings of IMECE 2012 International Mechanical Engineering Congress & Exposition, Houston, Texas, | SD-IAC
Malavolta M, Beyene A., Venturini M., " Experimental Implementation of a Micro-Scale ORC-Based CHP System for Domestic Applications, , Proceedings of ASME 2010, International Mechanical Engineering Congress & Exposition, Canada, | SD-IAC

Paper Industry
1 Papers / Publications
Chow, S. A., Ganji, A. R. and Hackett, B. W., " Opportunities for Energy Efficiency and Demand Response in Paperboard Manufacturing Facilities,, Proceedings of the Industrial Energy Technology Conference, New Orleans, Louisiana, May 11-12, 2005, | SF-IAC

Pattern recognition
1 Papers / Publications
Jaime B., Abdulaal A., Asfour S., " ELECTRIC LOAD PATTERN CLASSIFICATION USING PARAMETER ESTIMATION, CLUSTERING AND ARTIFICIAL NEURAL NETWORKS, nternational Journal of Power and Energy Systems, | MI-IAC

Phase Change
1 Papers / Publications
Blaney, J, Misiolek, W Z, Neti, S & Öztekin, " Stress Analysis of Encapsulated Phase Change Materials, Applied Thermal Engineering, 50 issue 1, 555-561, | LE-IAC

Power Generation
1 Papers / Publications
Gerdes, K., Fuller, J.A., Gopalakrishnan, B., Gupta, D.P., " Energy Supply Concerns: A United States Perspective on Electric Power Generation, Energy Studies Review, Vol. 17, No. 1, | WV-IAC

Power Plants
2 Papers / Publications
H. Gopalakrishnan and D. Kosanovic, " Real-Time Thermodynamic Performance Monitoring and Optimum Thermo-economic Operation of Power Plants, ASME Power 2011 Conference, Power Technical Publication: POWER2011-55018, Denver, CO, July 12-14, 2011, | MA-IAC
H. Gopalakrishnan, S. Suresh, and D. Kosanovic, " Energy and Exergy Analysis of a University Power Plant, 2011 ACEEE Summer Study on Energy Efficiency in Industry, Niagara Falls, NY, 40725, | MA-IAC

Process Cooling/Refrigeration
1 Papers / Publications
Muller, M. R., Rao, P., Muller M. B., " Optimize Energy Use in Industrial Cooling Systems, Chemical Engineering Progress, Nov, | RU-IAC

Process Heating
7 Papers / Publications
Morelli, F., Bretschneider, R., Dauzat, J., Guymon, M., Studebaker, J., Rasmussen, B.P, " Optimized Design of a Furnace Cooling System, Industrial Energy Technology Conference Proceedings, | AM-IAC
Gopalakrishnan, B., Gupta, D.P., Bitar, A., " Analysis of Compressed Air and Process Heating Systems – A Case Study from Automotive Parts Manufacturer in Mexico, Proceedings of the Society of Automotive Engineers World Congress, Detroit, MI, | WV-IAC
Gopalakrishnan, B., Gupta, D.P., " Energy Efficiency in Industrial Process Heating Systems, Knovel® Engineering Cases – Where Theory Meets Practice, Online Article, | WV-IAC
Kocoloski, M., McCarty, R., Eger, C., Hallinan, K. and Kissock, K., " Industrial Solid-State Energy Harvesting: Mechanisms and Examples, ACEEE Summer Study on Energy in Industry, White Plains, NY, July 24-27, | UD-IAC
Carpenter, K. and Kissock, K., " Energy Efficient Process Heating: Insulation and Thermal Mass, Society of Automotive Engineers World Congress and Exposition, Detroit, MI, April 3-6, | UD-IAC
Carpenter, K. and Kissock, K., " Energy Efficient Process Heating: Managing Air Flow, Society of Automotive Engineers World Congress and Exposition, Detroit, MI, April 3-6, | UD-IAC
Gilbert, R. and Kissock, K., " The Effect Of Thermal Mass On Thermal Transmission Loads, ASME International Solar Energy Conference, Long Beach, CA, June 27-30, | UD-IAC

Process Improvement
4 Papers / Publications
Gupta, D.P., Gopalakrishnan, B., Chaudhari, S., Jalali, S.M., " Development of an Integrated Model for Process Planning and Parameter Selection for Machining Processes, International Journal of Production Research, in press, ISSN 0020–7543 print/ISSN 1366–588X online, Taylor and Francis, | WV-IAC
Gopalakrishnan, B., Kokatnur, A., Gupta, D. P., " Design and Development of a Target-Costing System for Turning Operation, Journal of Manufacturing Technology Management, Vol. 18, No.2, | WV-IAC
Gopalakrishnan, B., Reddy, V.K., Gupta, D.P., " Neural Network for Estimating the Tool Path Length in Concurrent Engineering Applications, Journal of Intelligent Manufacturing, Vol. 15, | WV-IAC
Gopalakrishnan, B., Yoshii, T., Dappili, S.M., " Decision Support System for Machining Center Selection, Journal of Manufacturing Technology Management, Vol. 15, | WV-IAC

Product Design
1 Papers / Publications
Alkadi, N.E., Gopalakrishnan, B., Chaudhari, S., " Product Design for Energy Reduction in Concurrent Engineering: An Inverted Pyramid Approach, International Journal of Industrial and Systems Engineering, Vol. 15, No. 1, pp. 90-117, | WV-IAC

Productivity
1 Papers / Publications
Papadaratsakis, K., Kasten, D.J., Muller, M.R., " On Accounting for Energy Savings Through Industrial Productivity Improvements, ASEEE Summer Study on Energy Efficiency in Industry, Rye, New York, July, | RU-IAC

Productivity Improvements
2 Papers / Publications
Morelli, F., Halbert, T., 2Hignight, M., Kell, Z., 2Lacy, J., Rasmussen, B.P, " Automated Part Tracking and Metrology Applied to a Manufacturing Process, Industrial Energy Technology Conference Proceedings, | AM-IAC
Gupta, D., Gopalakrishnan, B., Godavarthy, H., " Energy Conservation Through Productivity Enhancement in Manufacturing Facilities, SAE World Congress & Exhibition, Detroit, | WV-IAC

Public School Energy Use
2 Papers / Publications
C. Pinthuprapa, B. Wu, " A Study of the Effectiveness of Energy Services in Public Schools, Proceedings of International Academic Conference, Maui, | MZ-IAC
Fonseca, D.J., Bisen, K., Midkiff, C.K. and Moynihan, G.P., " An Expert System for Lighting Energy Management in Public School Facilities, Expert Systems 23: 194-211, 2006, | UA-IAC

Pumps
2 Papers / Publications
Gopalakrishnan, V., Brogan, A. Das, R., Kissock, K, Chase, D., " Are Your Variable Speed Pumping Applications Delivering The Predicted Savings? Improving Control to Maximize Results, ACEEE Summer Study on Energy Efficiency in Industry, Buffalo NY, | UD-IAC
Schleicher, W.C. and Oztekin, A, " Hydraulic Design and Optimization of a Modular Pump-Turbine Runner, Energy Conversion and Management, 93, 388-398, | LE-IAC

Quality Control
1 Papers / Publications
Gopalakrishnan, B., Jaraiedi, M., Iskander, W., Ahmad, A., " Tolerance Synthesis Based on Taguchi Philosophy, International Journal of Industrial and Systems Engineering, | WV-IAC

Radiant Heat
3 Papers / Publications
Goossen, K. and Wetzel, A, " Application of Radiant Barriers to Reduce Heat Loss in Process Equipment, SAE Technical Paper 2011-01-0322, | DL-IAC
Wolfe, D. and Goossen, K.W., " Active Modulated Reflectance Roofing System to Tailor Building Solar Loads for Increased HVAC Efficiency, ASME 2014 8th International Conference on Energy Sustainability, ES-FuelCell 2014-6386, | DL-IAC
Wolfe, D. and Goossen, K.W., " Optimized Optical Structures for Active Modulated Reflectance Roofing System,, American Solar Energy Society Solar 2014, | DL-IAC

Recommissioning
1 Papers / Publications
Hallinan, K. P., Brodrick, P., Northridge, J., Kissock, J. K., Brecha, R. J., " Establishing Building Recommissioning Priorities and Potential Energy Savings from Utility Energy Data, ASHRAE Transactions, ML-11-003, | UD-IAC

Recycling
1 Papers / Publications
Yuan, C., Zhang, H. C., McKenna, G., Korzeniewski, C., and Li, J., " Experimental Studies on Cryogenic Recycling of Printed Circuit Board, International Journal of Advanced Manufacturing Technology, Vol. 34, 2007, pp. 657-666., | WM-IAC

Refrigeration
2 Papers / Publications
Hackett, B. W., Ganji, A. R. and Chow, S. A., " Energy Conservation Opportunities in Fresh Fruit and Processing/Cold Storage Facilities,, Proceedings of the 2005 ACEEE Summer Study on Energy Efficiency in Industry, West Point, NY, July 19-22, 2005, | SF-IAC
Elliott, M.S., Estrada, C., and Rasmussen, B.P., " Cascaded Superheat Control with a Multiple Evaporator Refrigeration System, 2011 American Control Conference, San Francisco, CA, | AM-IAC

Refrigeration modeling
1 Papers / Publications
Luthman, H. and J.F. Gardner, " Parameter Estimation for HVAC System Models from Standard Test Data, Proceedings of the ASME 2016 International Mechanical Engineering Congress & Exposition, PHoenix, AZ, November 11-17, | BS-IAC

Residential
5 Papers / Publications
Morelli, F., Abbarno, N., 2Bullock, J., Boese, E., 2Carter, B., 2Edwards, R., 2Mulvihill, C., 2Lapite, O., 2Mann, D., 2Purcell, E., and 2Stein IV, M., Rasmussen, B.P, " Design and Predictive Control of a Net Zero Energy Home, Industrial Energy Technology Conference Proceedings, | AM-IAC
Raffio, G., Isambert, O., Mertz, G., Schreier, C. and Kissock, K., " Targeting Residential Energy Assistance Programs, ASME International Solar Energy Conference, Long Beach, CA, June 27-30, | UD-IAC
Hallinan, K. P., Mitchell, A., Brecha, R. J., Kissock, J. K., " Targeting Residential Energy Reduction for City Utilities Using Historical Electrical Utility Data and Readily Available Building Data, ASHRAE Transactions, ML-11-009, | UD-IAC
Jochum, M., Murugesan, G., Kissock, K, Hallinan, K., " Low Exergy Heating and Cooling In Residential Buildings, Proceedings of ASME Energy Sustainability Conference, ESFuelCell2011-54671, Washington, DC, August 7-10, | UD-IAC

Saw Mills
2 Papers / Publications
Lin, W., Wang, J., Grushecky, S.T., Summerfield D., Gopalakrishnan, B., " Energy Consumption and Efficiency of Appalachian Hardwood Sawmills, Forest Products Journal, Vol. 62, No. 1, pp. 32-38, | WV-IAC
Halabe, U., Gopalakrishnan, B., Jadeja, J., " Advanced Lumber Manufacturing Model for Increasing Yield in Sawmills Using GPR Based Defect Detection Systems, International Journal of Advanced Manufacturing Technology, 56:649–661, | WV-IAC

Semiconductors
2 Papers / Publications
Gopalakrishnan, B., Mardikar, M., Korakakis, D., " Energy Analysis in Semi-Conductor Manufacturing, Energy Engineering Journal, Vol. 107, No. 2, | WV-IAC
Mardikar, Y., Gopalakrishnan, B., " A Computer Based Approach to Energy Conservation in Semiconductor Manufacturing, Proceedings of the Intelligent Systems in Design and Manufacturing V Conference, SPIE, Philadelphia, | WV-IAC

Sensors
2 Papers / Publications
Halabe, U.B., Agrawal, S., Gopalakrishnan, B., " Nondestructive Evaluation of Wooden Logs using Ground Penetrating Radar, Nondestructive Testing and Evaluation, | WV-IAC
Devaru, D., Halabe, U., Gopalakrishnan, B., " Ground Penetrating Radar (GPR) Based System for Non-Destructive Detection of Interior Defects in Wooden Logs, International Journal of Manufacturing Research, Vol. 3, No. 4, | WV-IAC

Smart Manufacturing
3 Papers / Publications
Morelli, F., Halbert, T., 2Hignight, M., Kell, Z., 2Lacy, J., Rasmussen, B.P, " Automated Part Tracking and Metrology Applied to a Manufacturing Process, Industrial Energy Technology Conference Proceedings, | AM-IAC
Gupta, D.P., Gopalakrishnan, B., " Energy Sensitive Machining Parameter Optimisation, International Journal of Industrial and Systems Engineering, | WV-IAC
Gopalakrishnan, B., McCoy, M., " Adaptive Process Control for Turning Operation using Expert System, International Journal of Industrial and Systems Engineering, Vol. 3, No. 6, | WV-IAC

Solar
2 Papers / Publications
Li, T.H.,Yang, F., Yuan, C.*, " A Novel Parabolic Trough Solar Lighting and Thermal System for Building Energy Efficiency, Proceedings of the 9th IEEE International Conference on Automation Science and Engineering, August 17-21, 2013, Madison, WI, U.S.A., Madison, WI, August 17-21, 2013, | WM-IAC
Mohseni-Languri, E., Taherian, H., Masoodi, R. and Reisel, J.R., " An energy and exergy study of a solar thermal air collector., Thermal science, Vol.13, 2009, pp.205-216., | WM-IAC

Solar Power
11 Papers / Publications
Najafi, H., and Woodbury, K. A., " Optimization of a Cooling System Based on Peltier Effect for Photovoltaic Cells, Solar Energy (2013), pp. 152-160, | UA-IAC
Najafi, Hamidreza and Woodbury, K. A., " Modeling and Analysis of Combined Photovoltaic- Thermoelectric Power Generation System, Journal of Solar Energy Engineering, 135, 031013 (2013), | UA-IAC
Najafi, Hamidreza and Woodbury, K. A., " Performance Analysis of Photovoltaic Panels in Alabama Area Using Tracking, Concentration and Cooling, ASME 2012 Energy Sustainability Conference, San Diego, USA, 41091, | UA-IAC
Firat C., Beyene A, " Comparison of direct and indirect PV power output using filters, lens, and fiber transport, Energy, The International Journal, Energy 41 (2012) 271-277, | SD-IAC
Beyene A., Garoma T., MacPhee D., " Integrated Design of Solar and Algae Plant, SET2011, 10th International Conference on Sustainable Energy Technologies, Turkey, | SD-IAC
Firat C., Beyene A., " Optical filters, concentrators, and fiber transmitters for PV energy conversion, Proceedings of ECOS 2010, 23rd International Conference on Efficiency, Cost, Optimization, Simulation, and Environmental Impact of Energy Systems, Switzerland, | SD-IAC
Nagabhairava,M., Ma, Y. and Kissock, K., " Economic Analysis of Solar PV and Batteries for Common Residential Electricity Rate Structures using Green Button Data, ES-FuelCell2013-18248, ASME 7th International Conference on Energy Sustainability, Minneapolis, MN, July 14-19, | UD-IAC
Winter, B. Louco, L, Kissock, K. Mariadass, P. and Daniels, M., " Design And Construction Of A Solar Thermal Refrigeration System For Patna, India, ES-FuelCell2013-18243, ASME 7th International Conference on Energy Sustainability, Minneapolis, MN, July 14-19, | UD-IAC
Ahmad, F., Komp, R., Ahmad, I. and Kissock, K., " Photovoltaic Module Assembly As Appropriate Technology In Pakistan, ASME International Conference on Energy Sustainability, Phoenix, AZ, May 17-22, | UD-IAC
Sabol, J.C., Misiolek, W.Z., Öztekin, A. and Neti, S, " Characterization of Intermediate Phases Formed Between Solid Nickel and Liquid Zinc for Potential Use in Solar Thermal Energy Storage Systems, Metallography, Microstructure and Analysis, 1 number 5, 208-216, | LE-IAC
Coscia, K., Nelle, S., Elliot, T., Mohapatra, S., Öztekin, A. and Neti, S., " Thermophysical Properties of LiNO3-NaNO3-KNO3 Mixtures for Use in Concentrated Solar Power, Journal of Solar Energy Engineering, 135(3), | LE-IAC

Steam
1 Papers / Publications

Steam/Boilers
1 Papers / Publications
Pasi, S., Muller, M.R., " Investigating the Impact of Boiler Aging In Replacement Decisions, ASEEE Summer Study on Energy Efficiency in Industry, Westchester, New York, July, | RU-IAC

Superheat
4 Papers / Publications
Elliott, M.S., and Rasmussen, B.P., " On Reducing Evaporator Superheat Nonlinearity with Control Architecture, International Journal of Refrigeration, vol. 33, no. 3, pp. 607-614, | AM-IAC
Elliott, M.S., Walton, Z., Bolding, B., and Rasmussen, B.P, " Superheat Control: A Hybrid Approach, HVAC&R Research, vol. 15, no. 6, pp. 1021-1044, | AM-IAC
Elliott, M.S., Shenoy, B., and Rasmussen, B.P, " A Control Architecture Solution to Superheat Nonlinearity, 2010 American Control Conference, Baltimore, MD, | AM-IAC
Elliott, M.S., and Rasmussen, B.P, " Evaporator Superheat Regulation via Emulation of Semi-Active Flow Control, 2009 Dynamic Systems and Control Conference, Hollywood, CA, | AM-IAC

Superior Energy Performance
2 Papers / Publications
Wu, B., Sandina Ponte and A. Khoshkhoo, " Computer-Aided Adaptation of Superior Energy Performance and ISO50001, 2013 International Academic Conference, Paris, | MZ-IAC
Gopalakrishnan, B., Ramamoorthy, K., Crowe, E., Chaudhari, S., Latif, H., " A Structured Approach for Facilitating the Implementation of ISO 50001 Standard in the Manufacturing Sector, Sustainable Energy Technologies and Assessments Journal, Vol. 7, pp. 154–165, | WV-IAC

Sustainability
10 Papers / Publications
Yuan, C., Zhai, Q., Dornfeld, D., " A three dimensional system approach for environmentally sustainable manufacturing, CIRP Annals-Manufacturing Technology, Vol.61, 2012, pp.39-42., | WM-IAC
Li, T.,Zhang, H. C., Yuan, C., Liu, Z.C., Fan, C. C., " A PCA Based Method for Construction of Composite Sustainability Indicators, International Journal of Life Cycle Assessment, Vol.17, 2012, pp.593-603., | WM-IAC
Hapke, H.M., Wu, Z., K.R. Haapala, and T.K.A. Brekken, " Wind Power, Energy Technology, and Environmental Impact Assessment, Chapter 16 in Volume II: The Global Supply Web: Designing Managing, and Measuring; The Business of Sustainability: Trends, Policies, Practices, and Stories of Success, | OR-IAC
Crowe, E., Gopalakrishnan, B., Adolphson, G., Biser, G., Cullen, K, " A Collaborative Approach to Sustainability: A Case Study of West Virginia Sustainable Communities, Proceedings of the World Energy Congress, Association of Energy Engineers, Atlanta, GA, | WV-IAC
Beyene A., " Sustainability of Underground Water and Energy Extraction, European Conference on Sustainability, Energy and the Environment, | SD-IAC
Stiber B., Beyene A., " Towards Integrating Desalination and Wave Energy Conversion Technologies, Proceedings of ECOS, 24rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, China, | SD-IAC
Beyene A., Muleta K.M., " Water Extraction, Ground Thermal Loss, and Land Subsidence: are Geothermal-plants Sustainable?, Proceedings of ECOS, 24rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, China, | SD-IAC
Choi, J., Thangamani, D., and Kissock, K., " Enhancing Industrial Sustainability by Improving Resource Efficiency, ACEEE Summer Study on Energy Efficiency in Industry, Buffalo NY, | UD-IAC
Mitrovic, B., Muller, M.R., " Energy Impacts of Productivity Improvements in Manufacturing, Industrial Energy Technology Conference, Houston, Texas, April, | RU-IAC
Trabachino, C., Muller, M.R., " Rationale For State Support of Industries of the Future, Industrial Energy Technology Conference, Houston, Texas, April, | RU-IAC

Thermal Storage
2 Papers / Publications
Xie, J.L., Yuan, C., " Numerical study of thin layer ring on improving the ice formation of building thermal storage system, Applied Thermal Engineering, Vol. 69, 2014, Pages 46–54., | WM-IAC
Kahan, M., Muller, M.R., " Impact of Real-Time Pricing on Payback of Thermal Energy Storage Systems, ASEEE Summer Study on Energy Efficiency in Industry, Westchester, New York, July, | RU-IAC

Vapor Compression
11 Papers / Publications
Rasmussen, B.P., and Shenoy, B., " Review Article: Dynamic Modeling of Vapor Compression Systems – Part II: Simulation Tutorial, HVAC&R Research, vol. 18, no. 5, pp. 956-973, | AM-IAC
Hariharan, N., and Rasmussen, B.P, " Parameter Estimation of Vapor Compression Cycle Models Using Limited Sensor Information, ASHRAE Transactions, ML-11-026, vol. 117, no. 2, pp.746-758, | AM-IAC
Rasmussen, B.P., Alleyne, A., and Musser, A., " Model-Driven System Identification of Transcritical Vapor Compression Systems, IEEE Transactions on Control Systems Technology, vol. 13, no. 3, pp. 444-451, | AM-IAC
Rasmussen, B.P. and Alleyne, A., " Control-Oriented Modeling of Transcritical Vapor Compression Systems, ASME Journal of Dynamic Systems, Measurement, and Control, vol. 126, no. 1, pp. 54-64, | AM-IAC
Elliott, M.S., and Rasmussen, B.P, " Model-Based Predictive Control of a Multi-Evaporator Vapor Compression Cooling Cycle, 2008 American Control Conference, Seattle, WA, | AM-IAC
Eldredge, B.D., Rasmussen, B.P., and Alleyne, A., " Automotive Vapor Compression Cycles: Validation of Control-Oriented Models, Society of Automotive Engineers 2006 World Congress, Detroit, Michigan, | AM-IAC
Keir, M.C., Rasmussen, B.P., and Alleyne, A., " Improving Energy Efficiency in Automotive Vapor Compression Cycles through Advanced Control Design, Society of Automotive Engineers 2006 World Congress, Detroit, Michigan, | AM-IAC
Eldredge, B.D., Rasmussen, B.P., and Alleyne, A., " Vapor Compression Cycles: Control-Oriented Modeling and Validation, 2005 ASME International Mechanical Engineering Congress, Orlando, FL, | AM-IAC
Keir, M.C., Rasmussen, B.P., and Alleyne, A., " Parametric Sensitivity Analysis and Model Tuning Applied to Vapor Compression Systems, 2005 ASME International Mechanical Engineering Congress, Orlando, FL, | AM-IAC

Vapor Compression Cycle models
1 Papers / Publications
Luthman, H. and J.F. Gardner, " Parameter Estimation for HVAC System Models from Standard Test Data, Proceedings of the ASME 2016 International Mechanical Engineering Congress & Exposition, PHoenix, AZ, November 11-17, | BS-IAC

Variable Speed Drive
1 Papers / Publications
Gopalakrishnan, V., Brogan, A. Das, R., Kissock, K, Chase, D., " Are Your Variable Speed Pumping Applications Delivering The Predicted Savings? Improving Control to Maximize Results, ACEEE Summer Study on Energy Efficiency in Industry, Buffalo NY, | UD-IAC

Waste Heat Recovery
6 Papers / Publications
Mehta, D. Paul, " Waste Heat Recovery and Radiant Heating as Alternative Energy\International Conference on Renewable Energy and It’s Future in the Arab World. ICREFAW., Amman, Jordan, April 22-24, 2013, | BD-IAC
Mehta, D. Paul and Ryan Esch, " Applications of Waste Heat Recovery in Automotive Manufacturing Related Industries., 15th International Research/Expert Conference., Prague, Czech Republic, 12-18 September, 2011, | BD-IAC
Mehta, D. Paul and Ryan Esch, " Energy Efficiency Through Waste Heat Recovery in Automotive Manufacturing Related Industries, The Society of Automotive Engineers (SAE) 2011 World Congress, COBO Center, Detroit, MI, April 12-14, 2011, | BD-IAC
Mehta, D. Paul and Ryan Esch, " An Analysis of Waste Heat Recovery in Automotive Manufacturing Related Industries., Proceedings of the American Council on Energy Efficient Economy (ACEEE), Niagara Falls, NY, July 27-29, 2011, | BD-IAC
Talom L. T., Beyene A., " Heat Recovery from Automotive Engine, Applied Thermal Engineering, Vol. 29, 2-3, | SD-IAC
Ziviani D., Beyene A., Venturini M, " Application of an Advanced Simulation Model to a Micro-CHP ORC-Based System for Ultra-Low Grade Heat Recovery, Proceedings of IMECE 2012 International Mechanical Engineering Congress & Exposition, Houston, Texas, | SD-IAC

Waste Reduction
1 Papers / Publications
Gopalakrishnan, B., Plummer, R.W., Kulkarni, R., Mangalampalli, P., " Solvent and Paint Waste Reduction using WASTEX: An Expert System for Industrial Waste Minimization, Journal of Environmental Systems, Vol. 29, Issue. 1, | WV-IAC

Wind Power
16 Papers / Publications
Hapke, H.M., Wu, Z., K.R. Haapala, and T.K.A. Brekken, " Wind Power, Energy Technology, and Environmental Impact Assessment, Chapter 16 in Volume II: The Global Supply Web: Designing Managing, and Measuring; The Business of Sustainability: Trends, Policies, Practices, and Stories of Success, | OR-IAC
Haapala, K.R. and P. Prempreeda, " Comparative Life Cycle Assessment of 2.0 MW Wind Turbines, International Journal of Sustainable Manufacturing, Vol. 3, No. 2, pp. 170-185, | OR-IAC
Haapala, K.R. and P. Prempreeda, " Environmental Impacts of Integrating Wind Energy Systems and Supplemental Energy Generation and Storage Systems, International Journal of Sustainable Manufacturing, Vol. 3, No. 2, pp. 186-206, | OR-IAC
Hapke, H., K. R. Haapala, Z. Wu, T. K. A. Brekken, " Life Cycle Assessment of Modern Wind Power Plants, 2010 ASME IDETC/CIE: 15th Design for Manufacturing and the Lifecycle Conference (DFMLC), Montreal, Canada, | OR-IAC
Krawczyk P., Beyene A., MacPhee D., " Two-Dimensional Fluid Structure Interaction of a Morphed Wind Turbine Blade, Wiley Online Library (wileyonlinelibrary.com)., | SD-IAC
MacPhee D., Beyene A, " Fluid-Structure of a Morphing Symmetrical Wind Turbine Blade Subjected to Variable Load, International Journal of Energy Research, Volume 37, Issue 1, pages 69–79, | SD-IAC
Puterbaugh M., Beyene, A., " Parametric Dependence of a Morphing Wind Turbine Blade on Material Elasticity, Energy 36 (1) (2011), pp. 466–474, | SD-IAC
Beyene A., Peffley J., " Constructal Theory, Adaptive Motion and Their Theoretical Application to Low Speed Turbine Design, American Society of Civil Engineers, Journal of Energy Engineering, | SD-IAC
MacPhee D., Beyene A., " Assessing the Stall Characteristics of a Flexible Blade: A 2D Computational Study, World Engineers Convention, Italy, | SD-IAC
MacPhee D., Beyene A., " A flexible turbine blade for passive blade pitch control in wind turbines, The Power Engineering and Automation Conference, China, | SD-IAC
Beyene A., MacPhee D., " Integrating Wind and Wave Energy Conversion, 2nd International Conference on Electrical and Control Engineering, China, | SD-IAC
Krawczyk P., Beyene A., " Two-dimensional fluid structure interaction of a morphed wind turbine blade, 23rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Serbia, | SD-IAC
Beyene A., Mangalekar D., " Part-load performance of twist-coupled flexible turbine blade at low Reynolds number, Proceedings of ECOS 2009, 22nd International Conference on Efficiency, Cost, Optimization, Simulation, and Environmental Impact of Energy Systems, Brazil, | SD-IAC
Wenning, T. and Kissock, K., " Methodology For Preliminary Assessment Of Regional Wind Energy Potential, ASME International Solar Energy Conference, Long Beach, CA, June 27-30, | UD-IAC

Wood
3 Papers / Publications
Lin, W., Wang, J., Grushecky, S.T., Summerfield D., Gopalakrishnan, B., " Energy Consumption and Efficiency of Appalachian Hardwood Sawmills, Forest Products Journal, Vol. 62, No. 1, pp. 32-38, | WV-IAC
Halabe, U., Gopalakrishnan, B., Jadeja, J., " Advanced Lumber Manufacturing Model for Increasing Yield in Sawmills Using GPR Based Defect Detection Systems, International Journal of Advanced Manufacturing Technology, 56:649–661, | WV-IAC
Devaru, D., Halabe, U., Gopalakrishnan, B., " Ground Penetrating Radar (GPR) Based System for Non-Destructive Detection of Interior Defects in Wooden Logs, International Journal of Manufacturing Research, Vol. 3, No. 4, | WV-IAC

Wood Manufacturing
1 Papers / Publications
Gopalakrishnan, B., Mate, A., Mardikar, Y., Gupta, D., Plummer, R., Anderson, B., " Energy Efficiency Measures in the Wood Manufacturing Industry, Proceedings of the 2005 ACEEE (American Council for an Energy Efficient Economy) Summer Study on Energy Efficiency in Industry on CD ROM, ISBN 0-918249-54-6, West Point, New York, | WV-IAC

Workforce Development
1 Papers / Publications
Wu, B., " Educating the Next Generation of Energy-Savvy Workforce, Proceeding of International Academic Conference, RHI13-348, Maui, | MZ-IAC

air flow
1 Papers / Publications
V. Prabhu, E. Languri, " Numerical Modeling of Buoyancy-Driven Air Flow inside Irregular Tent Air Gap, Proceedings of the 1st Thermal and Fluid Engineering Summer Conference, TFESC, New York, New York, August, | TT-IAC

artificial neural networks
1 Papers / Publications

buoyancy
1 Papers / Publications
V. Prabhu, E. Languri, " Numerical Modeling of Buoyancy-Driven Air Flow inside Irregular Tent Air Gap, Proceedings of the 1st Thermal and Fluid Engineering Summer Conference, TFESC, New York, New York, August, | TT-IAC

classification
1 Papers / Publications
Ahmed, A., Asfour, S., " A Fuzzy Genetic Algorithm Classifier: The Impact of Time-Series Load Data Temporal Dimension on Classification Performance, Machine Learning and Applications (ICMLA), 2016 15th IEEE International Conference on, Anaheim, CA, 18-20 Dec. 2016 , | MI-IAC

closed-loop forecastingg
1 Papers / Publications

clustering
2 Papers / Publications
Jaime B., Abdulaal A., Asfour S., " ELECTRIC LOAD PATTERN CLASSIFICATION USING PARAMETER ESTIMATION, CLUSTERING AND ARTIFICIAL NEURAL NETWORKS, nternational Journal of Power and Energy Systems, | MI-IAC
Ahmed, A., Asfour, S., " A Fuzzy Genetic Algorithm Classifier: The Impact of Time-Series Load Data Temporal Dimension on Classification Performance, Machine Learning and Applications (ICMLA), 2016 15th IEEE International Conference on, Anaheim, CA, 18-20 Dec. 2016 , | MI-IAC

coil
1 Papers / Publications
H. Rokni, E. Languri, W. Johnson, " Convective Electronic Device Cooling using Microencapsulated Phase Change Material Slurry in Planar Spiral Coil, ASME IMECE, Houston Texas, November, | TT-IAC

condensers
1 Papers / Publications
Ehsan Languri, Glenn Cunningham, Jie Cui, Stephen Idem, " Feasibility Study of the Use of Ground-Coupled Condensers in Industrial Thermal Management, ASME Power and Energy Conference June 2016, Charlotte, NC, | TT-IAC

conductivity
1 Papers / Publications
M. Esfahani, E. Languri, " Effect of Particle Size and Viscosity on Thermal Conductivity Enhancement of Graphene Oxide Nanofluid, International Communications in Heat and Mass Transfer, Vol 76, Pages 308-315, August, | TT-IAC

convective
1 Papers / Publications
H. Rokni, E. Languri, W. Johnson, " Convective Electronic Device Cooling using Microencapsulated Phase Change Material Slurry in Planar Spiral Coil, ASME IMECE, Houston Texas, November, | TT-IAC

cooling
1 Papers / Publications
H. Rokni, E. Languri, W. Johnson, " Convective Electronic Device Cooling using Microencapsulated Phase Change Material Slurry in Planar Spiral Coil, ASME IMECE, Houston Texas, November, | TT-IAC

cooling tower
1 Papers / Publications
Ehsan Languri, Pallavi Patil, Glenn Cunningham, Albert Welch, Anthony Loftis, " Dynamic Modeling and Experimental Analysis of Indeced Draft Cooling Tower, ASME Power and Energy Conference June 2016, Charlotte, NC, June, | TT-IAC

data mining
1 Papers / Publications
Ahmed, A., Asfour, S., " A Fuzzy Genetic Algorithm Classifier: The Impact of Time-Series Load Data Temporal Dimension on Classification Performance, Machine Learning and Applications (ICMLA), 2016 15th IEEE International Conference on, Anaheim, CA, 18-20 Dec. 2016 , | MI-IAC

demand
1 Papers / Publications
Jaime B., Abdulaal A., Asfour S., " ELECTRIC LOAD PATTERN CLASSIFICATION USING PARAMETER ESTIMATION, CLUSTERING AND ARTIFICIAL NEURAL NETWORKS, nternational Journal of Power and Energy Systems, | MI-IAC

evaporation
1 Papers / Publications
H. Bahraseman, E. Languri, " Numerical Modeling of Evaporation in Porous Media Flows, ASME IMECE, Houston Texas, November, | TT-IAC

fluid
1 Papers / Publications
M. Nunna, E. Languri, " Utilization of Graphene Oxide Nano Particles in the Base Fluid for Enhanced Heat Transfer Fluid - An Experimental Study, Tennessee Tech University Research Day, Cookeville, TN, April, | TT-IAC

framework
1 Papers / Publications
Jaime B., Abdulaal A., Asfour S., " ELECTRIC LOAD PATTERN CLASSIFICATION USING PARAMETER ESTIMATION, CLUSTERING AND ARTIFICIAL NEURAL NETWORKS, nternational Journal of Power and Energy Systems, | MI-IAC

fuzzy logic
1 Papers / Publications
Ahmed, A., Asfour, S., " A Fuzzy Genetic Algorithm Classifier: The Impact of Time-Series Load Data Temporal Dimension on Classification Performance, Machine Learning and Applications (ICMLA), 2016 15th IEEE International Conference on, Anaheim, CA, 18-20 Dec. 2016 , | MI-IAC

gap
1 Papers / Publications
V. Prabhu, E. Languri, " Numerical Modeling of Buoyancy-Driven Air Flow inside Irregular Tent Air Gap, Proceedings of the 1st Thermal and Fluid Engineering Summer Conference, TFESC, New York, New York, August, | TT-IAC

genetic algorithm (GA)
1 Papers / Publications
Ahmed A., Cintuglu M., Asfour S., Mohammed O., " Solving the Multi-Variant EV Routing Problem Incorporating V2G and G2V Options, IEEE Transactions on Transportation Electrification, September, | MI-IAC

graphene
2 Papers / Publications
M. Esfahani, E. Languri, " Effect of Particle Size and Viscosity on Thermal Conductivity Enhancement of Graphene Oxide Nanofluid, International Communications in Heat and Mass Transfer, Vol 76, Pages 308-315, August, | TT-IAC
M. Nunna, E. Languri, " Utilization of Graphene Oxide Nano Particles in the Base Fluid for Enhanced Heat Transfer Fluid - An Experimental Study, Tennessee Tech University Research Day, Cookeville, TN, April, | TT-IAC

ground coupled
1 Papers / Publications
Ehsan Languri, Glenn Cunningham, Jie Cui, Stephen Idem, " Feasibility Study of the Use of Ground-Coupled Condensers in Industrial Thermal Management, ASME Power and Energy Conference June 2016, Charlotte, NC, | TT-IAC

heat transfer
1 Papers / Publications
M. Nunna, E. Languri, " Utilization of Graphene Oxide Nano Particles in the Base Fluid for Enhanced Heat Transfer Fluid - An Experimental Study, Tennessee Tech University Research Day, Cookeville, TN, April, | TT-IAC

hidden Markov models (HMM)
1 Papers / Publications
Ahmed A., Cintuglu M., Asfour S., Mohammed O., " Solving the Multi-Variant EV Routing Problem Incorporating V2G and G2V Options, IEEE Transactions on Transportation Electrification, September, | MI-IAC

induced draft
1 Papers / Publications
Ehsan Languri, Pallavi Patil, Glenn Cunningham, Albert Welch, Anthony Loftis, " Dynamic Modeling and Experimental Analysis of Indeced Draft Cooling Tower, ASME Power and Energy Conference June 2016, Charlotte, NC, June, | TT-IAC

industrial
1 Papers / Publications
Ehsan Languri, Glenn Cunningham, Jie Cui, Stephen Idem, " Feasibility Study of the Use of Ground-Coupled Condensers in Industrial Thermal Management, ASME Power and Energy Conference June 2016, Charlotte, NC, | TT-IAC

liquid
1 Papers / Publications
Hamidreza Ghasemi Bahraseman, Ehsan Languri, " Numerical Modeling of Liquid-to-Vapor Phase Change in Porous Medium under Solar Heat Localization, ASME Power and Energy Conference June 2016, Charlotte, NC, June, | TT-IAC

load profiling
1 Papers / Publications
Ahmed, A., Asfour, S., " A Fuzzy Genetic Algorithm Classifier: The Impact of Time-Series Load Data Temporal Dimension on Classification Performance, Machine Learning and Applications (ICMLA), 2016 15th IEEE International Conference on, Anaheim, CA, 18-20 Dec. 2016 , | MI-IAC

machine learning
1 Papers / Publications
Ahmed, A., Asfour, S., " A Fuzzy Genetic Algorithm Classifier: The Impact of Time-Series Load Data Temporal Dimension on Classification Performance, Machine Learning and Applications (ICMLA), 2016 15th IEEE International Conference on, Anaheim, CA, 18-20 Dec. 2016 , | MI-IAC

media
1 Papers / Publications
H. Bahraseman, E. Languri, " Numerical Modeling of Evaporation in Porous Media Flows, ASME IMECE, Houston Texas, November, | TT-IAC

microencapsulated
1 Papers / Publications
H. Rokni, E. Languri, W. Johnson, " Convective Electronic Device Cooling using Microencapsulated Phase Change Material Slurry in Planar Spiral Coil, ASME IMECE, Houston Texas, November, | TT-IAC

modeling
4 Papers / Publications
Ehsan Languri, Pallavi Patil, Glenn Cunningham, Albert Welch, Anthony Loftis, " Dynamic Modeling and Experimental Analysis of Indeced Draft Cooling Tower, ASME Power and Energy Conference June 2016, Charlotte, NC, June, | TT-IAC
Hamidreza Ghasemi Bahraseman, Ehsan Languri, " Numerical Modeling of Liquid-to-Vapor Phase Change in Porous Medium under Solar Heat Localization, ASME Power and Energy Conference June 2016, Charlotte, NC, June, | TT-IAC
H. Bahraseman, E. Languri, " Numerical Modeling of Evaporation in Porous Media Flows, ASME IMECE, Houston Texas, November, | TT-IAC
V. Prabhu, E. Languri, " Numerical Modeling of Buoyancy-Driven Air Flow inside Irregular Tent Air Gap, Proceedings of the 1st Thermal and Fluid Engineering Summer Conference, TFESC, New York, New York, August, | TT-IAC

nano
1 Papers / Publications
M. Nunna, E. Languri, " Utilization of Graphene Oxide Nano Particles in the Base Fluid for Enhanced Heat Transfer Fluid - An Experimental Study, Tennessee Tech University Research Day, Cookeville, TN, April, | TT-IAC

nanofluid
1 Papers / Publications
M. Esfahani, E. Languri, " Effect of Particle Size and Viscosity on Thermal Conductivity Enhancement of Graphene Oxide Nanofluid, International Communications in Heat and Mass Transfer, Vol 76, Pages 308-315, August, | TT-IAC

nonlinear autoregressive exogenous input
1 Papers / Publications

oxide
1 Papers / Publications
M. Nunna, E. Languri, " Utilization of Graphene Oxide Nano Particles in the Base Fluid for Enhanced Heat Transfer Fluid - An Experimental Study, Tennessee Tech University Research Day, Cookeville, TN, April, | TT-IAC

parameter estimation
1 Papers / Publications
Jaime B., Abdulaal A., Asfour S., " ELECTRIC LOAD PATTERN CLASSIFICATION USING PARAMETER ESTIMATION, CLUSTERING AND ARTIFICIAL NEURAL NETWORKS, nternational Journal of Power and Energy Systems, | MI-IAC

parameter identificaiton
1 Papers / Publications
Luthman, H. and J.F. Gardner, " Parameter Estimation for HVAC System Models from Standard Test Data, Proceedings of the ASME 2016 International Mechanical Engineering Congress & Exposition, PHoenix, AZ, November 11-17, | BS-IAC

particle
1 Papers / Publications
M. Esfahani, E. Languri, " Effect of Particle Size and Viscosity on Thermal Conductivity Enhancement of Graphene Oxide Nanofluid, International Communications in Heat and Mass Transfer, Vol 76, Pages 308-315, August, | TT-IAC

planar
1 Papers / Publications
H. Rokni, E. Languri, W. Johnson, " Convective Electronic Device Cooling using Microencapsulated Phase Change Material Slurry in Planar Spiral Coil, ASME IMECE, Houston Texas, November, | TT-IAC

porous
2 Papers / Publications
Hamidreza Ghasemi Bahraseman, Ehsan Languri, " Numerical Modeling of Liquid-to-Vapor Phase Change in Porous Medium under Solar Heat Localization, ASME Power and Energy Conference June 2016, Charlotte, NC, June, | TT-IAC
H. Bahraseman, E. Languri, " Numerical Modeling of Evaporation in Porous Media Flows, ASME IMECE, Houston Texas, November, | TT-IAC

short-term load forecasting
1 Papers / Publications

size
1 Papers / Publications
M. Esfahani, E. Languri, " Effect of Particle Size and Viscosity on Thermal Conductivity Enhancement of Graphene Oxide Nanofluid, International Communications in Heat and Mass Transfer, Vol 76, Pages 308-315, August, | TT-IAC

slurry
1 Papers / Publications
H. Rokni, E. Languri, W. Johnson, " Convective Electronic Device Cooling using Microencapsulated Phase Change Material Slurry in Planar Spiral Coil, ASME IMECE, Houston Texas, November, | TT-IAC

solar
1 Papers / Publications
Hamidreza Ghasemi Bahraseman, Ehsan Languri, " Numerical Modeling of Liquid-to-Vapor Phase Change in Porous Medium under Solar Heat Localization, ASME Power and Energy Conference June 2016, Charlotte, NC, June, | TT-IAC

spiral
1 Papers / Publications
H. Rokni, E. Languri, W. Johnson, " Convective Electronic Device Cooling using Microencapsulated Phase Change Material Slurry in Planar Spiral Coil, ASME IMECE, Houston Texas, November, | TT-IAC

tent
1 Papers / Publications
V. Prabhu, E. Languri, " Numerical Modeling of Buoyancy-Driven Air Flow inside Irregular Tent Air Gap, Proceedings of the 1st Thermal and Fluid Engineering Summer Conference, TFESC, New York, New York, August, | TT-IAC

thermal
1 Papers / Publications
M. Esfahani, E. Languri, " Effect of Particle Size and Viscosity on Thermal Conductivity Enhancement of Graphene Oxide Nanofluid, International Communications in Heat and Mass Transfer, Vol 76, Pages 308-315, August, | TT-IAC

time-series
1 Papers / Publications
Ahmed, A., Asfour, S., " A Fuzzy Genetic Algorithm Classifier: The Impact of Time-Series Load Data Temporal Dimension on Classification Performance, Machine Learning and Applications (ICMLA), 2016 15th IEEE International Conference on, Anaheim, CA, 18-20 Dec. 2016 , | MI-IAC

vapor
1 Papers / Publications
Hamidreza Ghasemi Bahraseman, Ehsan Languri, " Numerical Modeling of Liquid-to-Vapor Phase Change in Porous Medium under Solar Heat Localization, ASME Power and Energy Conference June 2016, Charlotte, NC, June, | TT-IAC

vehicle routing problem (VRP)
1 Papers / Publications
Ahmed A., Cintuglu M., Asfour S., Mohammed O., " Solving the Multi-Variant EV Routing Problem Incorporating V2G and G2V Options, IEEE Transactions on Transportation Electrification, September, | MI-IAC

vehicle-to-grid (V2G)
1 Papers / Publications
Ahmed A., Cintuglu M., Asfour S., Mohammed O., " Solving the Multi-Variant EV Routing Problem Incorporating V2G and G2V Options, IEEE Transactions on Transportation Electrification, September, | MI-IAC

viscosity
1 Papers / Publications
M. Esfahani, E. Languri, " Effect of Particle Size and Viscosity on Thermal Conductivity Enhancement of Graphene Oxide Nanofluid, International Communications in Heat and Mass Transfer, Vol 76, Pages 308-315, August, | TT-IAC

water savings
1 Papers / Publications
Muller, M.R., Gardner, J., Muller, M.B., Shrestha, D., " The Energy-Water Nexus: Implications for Energy Efficiency, Industrial Energy Technology Conference, New Orleans, LA, | BS-IAC
Back to Top